Metal word stainless steel curved word stainless steel bending clamp advertising luminous characters metal bending clamp
specification: 10cm 13cm
Price: USD 29.00/set
MOQ: 1 set
Stainless steel bending pliers: 18 inch handle bending, bending more robust, bending clamp side of the two screws, the top of the screw is to adjust the elastic edge of the clip, the more tight twist, the more tight edge, but can not twist Too tight, too tight words will lead to the time when the excessive pressure on the screws above the dragon off, bending clamp mainly for large-scale luminous word thick material processing, generally within 1.2 or less, 1.0 stainless steel, The best, long-term thickening of the plate will damage the bending clamp!
Stainless steel bending pliers: 18 inch handle bending, bending more robust, bending clamp side of the two screws, the top of the screw is to adjust the elastic edge of the clip, the more tight twist, the more tight edge, but can not twist Too tight, too tight words will lead to the time when the excessive pressure on the screws above the dragon off, bending clamp mainly for large-scale luminous word thick material processing, generally within 1.2 or less, 1.0 stainless steel, The best, long-term thickening of the plate will damage the bending clamp!
Stainless steel word production process:
Stainless steel words are all stainless steel, this metal word is mainly installed in the room, and more high-end, but the requirements for the craft is relatively high, especially the welding of this one.
Here I would like to talk about the production of stainless steel word steps:
Step 1: panel production, usually flat, there are three-dimensional, three-dimensional, spherical and so irregular panels, spherical and other highlights is to use the plate slowly knock, the other pattern is engraving machine engraved of.
Step 2: the edge of the very simple, with a slotting machine first slot, and then to the panel to slot, or hand-held slot machine to slot, where welding where the slot, it is convenient, but for Stainless steel edge of the knife when the wear and tear is relatively fast, not too flexible, there are some limitations, narrow places may not be able to slot.
Step three: that is, welding this one is to see the welding master used a welding tool, and some with a soldering iron, and some use of argon arc welding, the funds allowed to use laser welding, are very good choice.
Step four: the floor is installed on it.
*Your email address will not be published. Required fields are marked.