Third generation stainless steel perforated pliers
specification: 2.5mm 3.2mm 3.5mm 4.2mm
Price: USD 16.30/set
MOQ: 1 set
Conventional hole diameter: 2.5mm 3.2mm 3.5mm 4.2mm 4 specifications, red needle can be interchangeable, a punch can play a number of punching specifications, if you buy a 3.5 punch, but also want to play 4.2 Of the hole, and then buy a set of punch red can be punched, the use of attention, 3.5mm red pin should be used with 3.5mm rushed to use, or do not wear, a long time red needle can be used worn light Grinding can continue to use
The third generation of Punching Punch enhanced version is the third generation of the upgraded version of the industry's only one with a double spring and needle needle iron punch, double spring and needle needle iron needle back needle , Greatly improve the efficiency of drilling, a set of ten holes can be a minute to play, punching clamp with 20 cm long handle, punch and effort to facilitate (effort, girls can punch Oh), and perforated aperture 2.5mm, 3.2mm, 3.5mm, 4.2mm four holes (all sizes of self-tapping screws can be used), red with a blunt can then gently polished with a corner mill to continue to use, Grinding too short, grinding to a certain extent is no longer available, the use of what is not clear at any time contact customer service, customer service will do their best to answer it!
Punching clamp is used for luminous characters on the side of the hole, playing on the floor of the PVC hole, no longer have to drill to drill, punching pliers have a needle to ensure that the needle can pull down, we have a double spring, more Flexible, if the customer needs to be with our customer service advice, each customer can be equipped with a pair of pliers spring!
Note: punching punch needle punching for high-speed steel made, very durable, with a blunt can then use the angle grinder and then polished look, grinding sharp in the new red needle, so do not often change the needles , Punching punch punching punch with 2.5mm, 3.2mm, 3.5mm, 4.2mm four commonly used specifications, if there are other specifications or other shapes of the factory can be customized.
Red needle is grinding is a slope, all the time when there are some thick side of the sidebelt will not be punched, only to play the words will be stuck in the inside, the customer will be mistaken for pliers problems, thick Sidebelt is there will be two rings, if the pliers have any questions please consult our customer service, customer service will solve problems for you!
*Your email address will not be published. Required fields are marked.