Industry Endless Felt Belt For Roll To Roll Transfer Printing Machine
HTF
Price: USD 1.00/m2
MOQ: 1 m2
Temperature resistance:continues:180°C, speaks: 280°C.The material will lose weight ,and reduce its self life if it is exposed to high temperature(about 350°C) for a period of time (longer than10 minutes)
Total thickness :6-10mm;common specifications are 6mm,8mm,10mm,
Width :600mm-3500mm;common specifications are 1000mm, 1980mm, 2000mm
Length:1,800mm~30,000mm
Density Effective blankets part of the standard is 2800g/m2-3600g/m2 ;Standard or special requirements can be customized.
Description:
Temperature resistance:continues:180°C, speaks: 280°C.The material will lose weight ,and reduce its self life if it is exposed to high temperature(about 350°C) for a period of time (longer than10 minutes)
Total thickness :6-10mm;common specifications are 6mm,8mm,10mm,
Width :600mm-3500mm;common specifications are 1000mm, 1980mm, 2000mm
Length:1,800mm~30,000mm
Density Effective blankets part of the standard is 2800g/m2-3600g/m2 ;Standard or special requirements can be customized.
Specification:
Color:Off white
Material:100% Nomex + Nomex Fabric
Highest temperature:280℃
Application:Heat transfer printing equipment
Advantage:Acid resistance, alkali resistance, heat resistance, cold resistance, abrasion resistance, oil resistance, heat resistance, high temperature, flame retardant, resistance to heat, anti-slip, moisture-proof, anti-static, anti-corrosion, etc.
Advantage
1. 100% nomex raw material
2. The max temperature resistant 280℃
3. Endless type - no joint(Don't worry about the fracture)
4. Misaligned----Our base cloth is use endless industrial silk. Testing report showed the misaligned rate is about ±3mm. enclosed our base cloth for your consideration
5. Shrinkage----The base cloth can control the shrinkage rate in 2.5%--3%.
Application
That kind of felt belt suitable for transfer printing machine,such as Italy Farah,Rafah,Mantian,Santex,Japan East Valley,Texas691.692,Haining Shrink Machine,Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.
Direction of our felt belt
1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter
to see if the perimeter is the same.
2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to
170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,
idle for 2 hours.
3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg
according to your needed and start to printing.
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Whatsapp:+86 18032422676
Skype:huataogroup
Email:export@huataogroup.com
Website:
www.industrial-felts.com
www.huataolover.com
www.geosynthetic-fabric.com
sjzht.bossgoo.com
*Your email address will not be published. Required fields are marked.