12.5MN Two-Column Open Die Forging Press
LS Heavy Industry Engineering Co., Ltd. 12.5MN pull-down hydraulic forging presses with two rectangular columns are directly oil-hydraulically driven. They offer a high forging speed and better visibility of the forging area for operator.
They have a casting mono-block frame ensuring a high eccentric load resistance and structure rigidity. The casting frame is also designed to have a low working stress, thus a high level of forging accuracy. All hydraulic cylinders and hydraulic stations including pumps, motors, tanks, valves, pipes are arranged under the floor. The presses can be installed in the low plant building.
The frame with low gravity center ensures a very small displacement under eccentric loading, it is also free of vibration during high speed forging work. Together with our technology in controlling proportional servo cartridge valve and replenishing & relief valve station, and special pipeline design, the sustainable high performance forging work is easily available.
12.5MN Oil-Hydraulic Press for Open Die Forging
LS Heavy Industry Engineering Co., Ltd. 12.5MN pull-down hydraulic forging presses with two rectangular columns are directly oil-hydraulically driven. They offer a high forging speed and better visibility of the forging area for operator.
They have a casting mono-block frame ensuring a high eccentric load resistance and structure rigidity. The casting frame is also designed to have a low working stress, thus a high level of forging accuracy. All hydraulic cylinders and hydraulic stations including pumps, motors, tanks, valves, pipes are arranged under the floor. The presses can be installed in the low plant building.
The frame with low gravity center ensures a very small displacement under eccentric loading, it is also free of vibration during high speed forging work. Together with our technology in controlling proportional servo cartridge valve and replenishing & relief valve station, and special pipeline design, the sustainable high performance forging work is easily available.
Pull-down forging presses are most suitable for the installing in the insufficient workshop height required by forging capacity of the presses.
Nominal force: 6.3MN/8MN/10MN/12.5MN/16MN/20MN/25MN
Technical Data
|
12.5 Forging Press |
Data |
||
|
Nominal force |
﹝MN﹞ |
12.5 |
|
|
Net. Daylight |
﹝mm﹞ |
2750 |
|
|
Max. stroke |
﹝mm﹞ |
1200 |
|
|
Clearance distance between columns |
﹝mm﹞ |
1950 x 1100 |
|
|
Moveable table size, L.R. x F.B |
﹝mm﹞ |
4200 x 1500 |
|
|
Moveable table stroke |
﹝mm﹞ |
2700 |
|
|
Moveable table speed |
﹝mm/s﹞ |
0-240 |
|
|
Stroke of bottom die shifting device |
﹝mm﹞ |
2500 |
|
|
Table width of bottom die shifting device |
﹝mm﹞ |
650 |
|
|
Speed of bottom die shifting device |
﹝mm/s﹞ |
0-240 |
|
|
Allowable eccentricity |
﹝mm﹞ |
≤φ300 |
|
|
Upper die height |
﹝mm﹞ |
700 |
|
|
Bottom die height |
﹝mm﹞ |
850 |
|
|
Rated working pressure |
﹝MPa﹞ |
31.5 |
|
|
Max. approach speed |
﹝mm/s﹞ |
350 |
|
|
Max. return speed |
﹝mm/s﹞ |
350 |
|
|
Return force |
﹝kN﹞ |
2073 |
|
|
Forging accuracy |
﹝mm﹞ |
±1 |
|
|
Forging speed |
Normal forging |
﹝mm/s﹞ |
90 |
|
Press height |
Above the floor ±0 |
﹝mm﹞ |
4100 |
|
Below the floor ±0 |
﹝mm﹞ |
5310 |
|
|
Normal forging |
Penetration |
﹝mm﹞ |
80-100 |
|
Stroke |
﹝mm﹞ |
100-150 |
|
|
Frequency |
﹝strokes/min﹞ |
20-45 |
|
|
High-speed forging |
Penetration |
﹝mm﹞ |
3-5 |
|
Stroke |
﹝mm﹞ |
20-25 |
|
|
Frequency |
﹝strokes/min﹞ |
80-85 |
|
*Your email address will not be published. Required fields are marked.