Machinery & Equipment
High Efficiency OMT/BM6 Series Hydraulic Motors insotre and is ready for shipping and waiting for its buyer
OMT
Description
High Efficiency OMT/BM6 Series Hydraulic Motors
Product Description
Specification
Introduction
Max. pressure is the allowed pressure at the inlet port. Rated pressure is the working pressure difference between inlet and outlet port.
A simultaneous maximum RPM and maximum pressure NOT recommended.
Maximum pressure or maximum RPM operation: 10% of very minute.
Recommended fluids: Anti-wear type of hydraulic oil. Viscosity recommended 37-73cSt. Recommended filtration ISO18/13. Maximum operating temperature recommended 80°C.
Special high pressure capacity shaft seal ensures back pressure up to 10 Mpa.Recommended preferable back pressure 5 Mpa. Case drain line is recommended when back pressure higher than 5 Mpa. When case drain line is used, make sure the motor is always filled with oil. The motor life is benefited from a case drain line.
It is highly recommended thar the motor runs at 30% of rated pressure for at least one our before application of full load. Be sure the motor is filled with fluid prior to any load applications.
Feature
Compact in design with disc valving and Geroler
High pressure capacity shaft seal
Design and manufacture of the spline and drives give the motor durability
Wide variety of mounting flanges,shafts,ports and speed provides design flexibility
Direction of shaft rotation and speed can be controlled easily and smoothly
Best combination of high efficiency and economy in medium duty applications
Advantages
Displacement ranges from 195cc/r to 985cc/r.
Advanced gear set parameter design, low start- up pressure, high efficiency and steady low rotation.
High operate pressure and output torque.
Advanced shaft seal design, high backpressure abaility.
Advanced driver-linker design, prolong operating life.
Advanced distribution system design which canautomatically compensate in operation.
Motor can be used in parellel or in series, outer drain pipes when in series linkaged.
Compact volume and easy installation
Adapt tapered roller bearings that pe
Read More
HEBEI ZHAOSHENG HYDRAULIC MACHINERY COMPANY
orbital hydraulic motor,hydraulic motor,steering control unit
Address: NINGJIN,XINGTAI,HEBEI,
XINGTAI, HEBEI
China,
Tel: 0086-18331928816
Fax:
