Rubber & Products
Description
CHARACTERISTICS:
Electronic Potting Compound Silicone are condensation silicone potting compound in two parts with the characteristics of low viscosity,easy pouring operation,and good bonding feature.It can be cured completely at room temperature. The safety of potting compound silicone can reach the EU-ROHS requirements fully.
APPLICATION:
*Applying for the surface of PC(Poly-carbonate), PP, ABS, PVC, metal, etc
*Potting for Protection of general electronic module
*Insulation, waterproof and bonding of electronics parts
*Filling for LED, LCD electronic display, circuit board
*Outdoor protection for LED screen.
TECHNICAL GUIDELINES:
1).Pls put part A and B in separate container and stir evenly before mixing the two parts together.
2).Mixing Ratio: part A:part B = 10:1
3).Bubble release if necessary , Deaeration the mixture under 0.08 MPa for 3 minutes.
4).It is cured at room temperature, so pls put it under room temperature after pouring.
It comes to next process when basically cured, and it takes about 24 hours for completely cured.
TECHNICAL PARAMETERS:
Viscosity(cps):1000~2600
Hardness:12~18 Shore A
Mixing ratio: 10:1
Operating time:30~60min
Curing time:4~5h
NOTICE:
1). All data of this product above base on 25°C with 55% humidity conditions.
We don& acute;t guarantee a same date if testing under different conditions, or when data was regenerated.
2). Bubble release if necessary & Deaeration the mixture under 0.08 MPa for 3 Minutes.
PACKAGE:
22kg/set (Part A 20kg + Part B 2kg)
SHELF LIFE AND TRANSPORTATION:
1).Twelve(12) months when stored at 24℃ in original unopened packages.
2).This kind of product is non-dangerous product , it can be transported as general chemicals.
3).Products exceed the storage life should be confirmed normal before using.
For more information, welcome to contact Lilian:
Phone: 86-13617490457
E-mail: lilian(at)xrsil(dot)com
Skype: 985280853(at)qq(dot)com
Company: XINRUN GROUP LIMITED
Read More
Dongguan Xinrun Group Limited
Food/Medical Grade Silicone Rubber,Mold Making Silicone Rubber
Address: No.2,Zhouliao Road, Langzhou Industrial Zone,Changping, Dongguan, Guangdong, China,
DongGuan, GuangDong
China, 523589
Tel: 0086-769-89975661
Fax:
