Air Treatment & Conditioning
Hydraulic Bending Machine with HRC55-60 Corrugated Punching Moulds for Roofing Sheet
According to profile
Description
Hydraulic Bending Machine with HRC55-60 Corrugated Punching Moulds for Roofing Sheet
?
Hydraulic Arch crimping machine is and bending machine for roof panel and used to crimp the formed corrugated sheets into horizontal stripes through hydraulic crimping mold. The distance between each press will decide the curvature of the arch. It is suitable for edge of buildings, parking garage, pavilion and various round roofs of buildings. The Composition of hydraulic Arch crimping machine Crimping main machine and Control panel, this crimping machine can crimp both ends of roofing sheet.
- - - -
Hydraulic arch crimping machine technology Specification |
Formed Profile Type: | Arch Roof panel |
Raw material thickness: | 0.3-1.0 mm |
Corrugated Punching moulds | CR12, HRC55-60 |
Line speed: | 0-10m/min |
Feeding mode: | Servo motor, 1kw |
Main power: | 0.85KW |
Hydraulic station power | 5.5KW |
Electrical control system | PLC |
Max. bending angle | 120 |
Machine size | 3000 mm×1400mm×1400 mm |
- - - -
Read More
Jiangyin Dingbo Technology CO., Ltd.
Roof Panel Roll Forming Machine,Corrugated Roll Forming Machine,Deck Roll Forming Machine
Address: 3#Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu province, China,
wuxi, Jiangsu
China, 214400
Tel: 86-510-86952138
Fax: 86-510-86952128
