Motors & Engines

1. Home
2. Products
3. Electronic & Electrical
4. Motors & Engines

Share us

Sewage Cooling Tower

No.1-1

Send Inquiry

Description

If you are going to buy cheap and high quality sewage cooling tower from one of the best sewage cooling tower manufacturers,Website:http://www.wuxifangzhou.com, or you are going to check the price with a such factory, Fangzhou Water Cooling Equipment Co.Ltd is always at your service.1) according to the noise level is divided into:Regular (P), low noise (C) (D), ultra low noise type, addition (G)2) according to the tower structure classification with square and circular towers.Design and selection:1) the cooling tower should be high efficiency, energy consumption province, low noise, light weight, small volume, long service life, easy installation and maintenance, less water.2) choose product cooling tower should be consistent with the glass fiber reinforced plastic cooling tower part 2: large glass fiber reinforced plastic cooling tower & quot;requirements in GB 7190.2 1997.3) condition and low temperature type cooling tower& acute;s standard conditions such as the design rules for the larger gap, shall be provided according to the product sample of the thermal performance curve is selected.4) provided by the manufacturer of thermal performance curves, such as using simulated test data on the tower, should be based on the simulation test conditions and the design of the tower tower of the differences in operating conditions, to correction of simulation test data of the tower, the correction coefficient is 0.80 ~ 1.00.5) the position of the cooling tower, should keep a certain distance between with buildings, and avoid arranged near the heat source, exhaust gas and flue gas discharge outlet, such as can not meet the above requirements, technical measures should be taken, at the same time to check the thermal performance.6) should be no oil in the circulating cooling water and the material of glass fiber reinforced plastic dissolution, the turbidity of water should not be greater than 50 mg/L. And algae and water quality stability measures should be taken.7) design of circulating

Read More