Industrial Supplies Stocks
Description
80 Mesh Rubber Recycling Machine Production Line Water Cooled System
?
?
Specifications
?
WholeTire Shredder ( into block 50x50mm)?
1. New developed, less power?
2. Special blade, long working life?
3. Less repair?
?
This machine has the following features as?compact structure, advanced technology,?low
power consumption, high eficiency, crushing room with folio structure, easy to maintain, etc.?
The machine adopts hard alloy steel as its blade, high rigidity and wearble,?repeating repair?
use polong use life. Circle mesh screen is steel gridding structure, big area for material?
dropping is good for production of eligible rubber materail. The oversize types should be
cutted before crushing.
?
Each unit has three buncher,This device is water-cooled system, product for 20-80 mesh
fineness (can be adjusted.).
?
Structure and Principle: This machine is made up of three sets of crusher hosts,Tornado
collection agency?and set of electrical equipment.The host is mde up of frame ,main motor,
Set of electrical equipment,feeding mechanisms,Regulatory agencies,A pair of moving disc
and fixed disc?set.The basic principle for the relative motion through two micropipette grinding
materials, cutting, grinding and achieve the goal. Using the wind, water temperature, effectively
controlled by powder grinding materials to ensure the quality. Sheets-feeder chooses stepless
speed, can according to different materials, and adjust the corresponding feeding speed, thus
obtains the optimal output and quality. Through collecting agencies, take whirlwind, without
any product powder dust. Small size, low noise, high output, low energy consumption, simple
operation, easy disassembly, without any environmental pollution. Income and fine powder
with numerous burr and powder surface fractal, easy and other colloid.
?
?
?
Technical Parameter:
?
1. The size of raw material: 900 whole tyre
?
2. The size of finished material: 50*50 mm
?
3. Capacity: 1-3T/h
?
4. Main motor: 34Kw
?
5. Overall Size: 2550*2140*2480mm
?
6. Weight: 30T
?
?
USE:
?
The line is complete automatic line, from drawing out bead wires, crushing the whole tyre,
separating the thin steel and fiber to the rubber powder, The line is recycling the waste
tyre under the normal temperature
?
Our tire recycling line is designed to make rubber powders. And this kind of tire can be
applied to:
?
1. Auto industry (vibration absorbing materials, shock absorber)
?
2. Rubber products (safety cushion, road isolation barrier, rubber tube, rubber plate,
rubber sole and so on)
?
3. Athletic sports ground surface materials (court, prefabricated rubber running track)
?
4. Road engineering and bituminous road mad surfacing (to be mixed with asphalt and
be used for surfacing roads or sleeper of railway, underground railway and so on)
?
5. Building materials (rubber tile rubber floor brick, water proof coil, vibration proof
foundation applied in construction and so on)
?
6. Agricultural use (pavement of stock farm and son)
?
- - - -
Model | 800 | 1200 |
Capacity(T) | 1~2 | 2-4 |
Specification of feeding | ≤850 | ≤1250 |
Specification of discharging(mm) | ≤50X50 | ≤60X60 |
Main Motor(Kw) | 45 | 45*2 |
Discharging Motor (Kw) | 4 | 4 |
Cutter rotate speed(r/min) | 16 | 10 |
Screener rotate speed | 6 | 8 |
Dimension (LXWXH)(m) | 2.84X3X2.4 | 4.05x2.8x3.4 |
Weight(T) | 8 | 21 |
- - - -
?
?
FAQ
?
The brief description of tire processing:
?
1. First, we need to cut and draw out the bead wire of the tire by the Compound Tire Cutter
and Extractor,
?
2. Then we can put the tire into the Tire Crusher by the conveyor, the tire will be crushed
into small pieces with the size of 50x50mm.
?
3. And those small pieces will be conveyed to the Secondary Crusher to be crushed into
small particles of 6-12mm.
?
4. Now we need a Magnetic Separator to separate the steel fiber from the rubber particles,
and a Square Magnetic Vibrator to separate the coarse fiber from the rubber particles by
vibrating.
?
5. The coarse fiber will be collected in a box and the rubber particles will be delivered to a
third Rubber Shredder to be shredded smaller of 1-4mm.
?
6. And then we need a Static Vibrator to gather the small fiber into clumps by static force,
and to filter the rubber particles by screen.
?
7. The fiber clumps will be stored in the Fiber Collecting Machine by conveyor, while the
rubber particles will be sent to the Airflow Classifier,
?
8. The residual fiber will be blowed?to the Fiber Collecting Machine by the Airflow Classifier,
and the purified rubber particles will be collected by the Storage Bin,
?
9. And then be delivered to the Rubber Grinder, so the rubber particles will be grinded
into rubber powder.
?
10. Then the rubber powder will be separated by the Three-layer Vibrator according to its
size, and be packed automatically by the Packing Machine.
?
11. The exhaust gas and dust will be collected by the Cyclone Collector, then the dust will
be absorbed by the Dust Separation Machine,
?
12. While the gas will be filtered by Activated Carbon in the Air Purifier and be emitted to Air.
??
Read More
Jiangyin Zhenya Machinery Co., Ltd
Tyre Shredding Machine,Rubber Shredding Machine,Tire Shredder Machine
Address: No . 20 Jinmao Road , Zhutang Town , Jiangyin City , Jiangsu Province , China.,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-86386879
Fax: 86-510-86386879
