Cast & Forged

1. Home
2. Products
3. Minerals & Metallurgy
4. Cast & Forged

Share us

0.6 μm TC Size Tungsten Carbide Rod Blank , Sintering Furnace Tungsten Carbide rounds

AIA-1

Send Inquiry

Description

0.6 μm TC Size Tungsten Carbide Rod Blank 310 mm with 10% CO HIPPed by Sintering Furnace
?
?
Description:
?
Cemented carbide is a kind of composite which is produced by powder metallurgy techniques. It consists of wear resistant particles (hard phase WC) and binder agent Cobalt (ductile phase).
?
Our tunsten carbide rod are made of optimum quality raw material WC and Cobalt. Powders are intensively mixed together according to desired ratio and subsequently processed with kneading and extrusion, producing rod form under a certain press. Then HIP sintering process were employed to consolidate whole microstructure, eliminating unwanted porosity.
?
?
Specification:
?

?
Solid rods (Metric):

?

- - - -
D | Tolerance of Diameter (mm) | Length | D | Tolerance of Diameter (mm) | Length |
mm | mm | mm | mm |
3.0 | +0.2/+0.4 | ?310? | 10.0 | +0.2/+0.4 | 310 |
4.0 | +0.2/+0.4 | 310 | 12.0 | +0.2/+0.4 | 310 |
5.0 | +0.2/+0.4 | 310 | 14.0 | +0.2/+0.4 | 310 |
6.0 | +0.2/+0.4 | 310 | 16.0 | +0.2/+0.4 | 310 |
7.0 | +0.2/+0.4 | 310 | 18.0 | +0.2/+0.4 | 310 |
8.0 | +0.2/+0.4 | 310 | 20.0 | +0.2/+0.4 | 310 |
- - - -

?

1. Diameter can be customized from 2mm to 25mm as requests.

2.?Post-processing service:?Cutting into desired length.
?

?

?Application:?

?

- - - -
Jinlei?Grade | ISO?Grade | The?recommended?tools | Description |
HF30 | K30?- K40 | Solid?carbide?drills
Solid?carbide?end?mills | With 10% cobalt and 90% tungsten carbide. Superior advantages where high toughness and sharp edge profiles are needed. Outstanding performance over a wide range of tool and workpiece types. |
Application | ? ?? ? Corrosion and heat resistant steel
? ?? ? Stainless steel
? ?? ? Non ferrous metal
? ?? ? Plastics |
- - - -

?
?

Competitive Advantage:

?

Quality can be taken for granted. We have been producing tungsten powder, tungsten carbide powder FOR 11 years, being famous for its quality and winning high reputation within China. As so, each pre-process for making solid rods is clearly and strictly monitored. Thus, the quality of solid TC rods is guaranteed to be high and stable.?
?
Comparing to high speed steel, tungsten carbide consists of natural hard and stable phase, and practically doesn’t lose any level of its high hardness when heating up. However, the high hardness of HSS is only in a result of quenching process during which hard phase nucleates & grows. It breaks down easily when annealing. Therefore, carbide tools last significantly longer than HSS. In addition, carbide allow for faster machining and carbide tools can also withstand higher temperatures than standard high speed steel tools.
??
?

Read More