Industrial Washing Machine
Description
K30 Tungsten Carbide Tipped Cutting Tools for Plastic / Rubber Crusher / Shredder
?
Brief Introduction:
?
Carbide tipped cutters for plastic / rubber / tyre?crushers?are sharp enough to help you increase work efficiency and have much longer using life than normal steel cutters.?OEM production as per customer’s drawing and designs. Also we can select proper material grade according to your usage. K30 is the most commonly used material grade for carbide tipped knives.
?
Quality Control:?
?
Constant quality checks accompany the whole production process of tungsten?carbide cutters to assure our customers are receiving the highest quality products.?Test reports supplied with shipment.?
?
?
Advantages:
?
Tungsten Carbide Tipped?Cutters for Plastic / Rubber Crusher:?
1. Top-quality virgin?raw material
2.?Produced with precision molds, the products have better dimensional accuracy and uniform.?
3. High precision surface,burr-free
4. more than 10 years professional manufacture experience
5. Strict quality management system
6. Small orders accepted.
7. OEM and ODM
?
Material Grades for?Tungsten Carbide Tipped Knives:
?
- - - -
Grade | Density g/cm3 | Hardness HRA | Strength N/mm2 Min. | Applications | ISO grade |
YG6X | 14.8-15 | 91.7-93 | 1600 | High wear resistance and high strength; machining chilled cast iron and refractory steel, finishing of normal cast iron | K10(ANSI C-2) |
YT5 | 12.85-13.05 | 89.5-91 | 1700 | Excellent in strength, impact resistance and resistance to thermal shock; Rough turning, rough planning and semi planning of Carbon steel and alloy steel | P30(ANSI:C-5) |
YT15 | 11.2-11.4 | 92-93 | 1350 | Good wear resistance, with normal impact resistance; Semi finishing and finishing steel, cast steel, alloy steel. | P10 |
YT14 | 11.3-11.6 | 91.3-92.3 | 1450 | High in impact resistance and strength; Semi roughing and semi finishing of steel, cast steel and alloy steel. | P20-P30 |
YT726 | 14-14.3 | 92.5-93.5 | 1420 | High red hardness and wear resistance. Turing and milling of chilled cast irons cast alloy irons and quenched steel. | K05-K10/M20 |
YT798 | 12.23-12.43 | 91.6-92.6 | 1700 | High toughness and high resistance to thermal shock and plastic deformation. Milling of alloy steel, alloy tool steel, manganese steel and stainless steel. | P20-P25/M20 |
YT535 | 12.6-12.8 | 90-91.5 | 1760 | High wear resistance and red hardness, high strength in use. For continuous rough turning and milling of cast or forged steel. | P30 |
ZP25 | 12.5-12.7 | 91.4-92.3 | 1750 | Fine in wear resistance and toughness; Rough turning, milling, planning and depth drilling of carbon steel, cast steel, manganese steel and alloy steel. | P20-P30 |
ZP35 | 12.6-12.8 | 90.5-91.5 | 1770 | A versatile grade, high in red hardness, strength and resistance to impact and thermal shocking. Roughing and strong cutting of steel and cast steel. | P30-P40 |
YG6 | 14.8-15 | 90-92 | 1650 | Good wear resistance, resistance to impact and thermal shocking. Semi finishing and finishing of cast iron, nonferrous metal, alloy and nonmetallic material. | K15-K20 |
YG813 | 14.3-14.5 | 91.5-92.5 | 1750 | Good wear resistance, high bending strength and high resistance to binding. Machining of refractory alloys, stainless steel and high manganese steel, etc. | K20-K30 |
YW1 | 13.25-13.5 | 92-93.2 | 1420 | A versatile grade, good in red hardness, able to endure normal impact load; machining of refractory steel, high manganese steel, stainless steel, also suitable to the normal steel and cast iron. | M10/P10 |
YW2 | 13.15-13.35 | 91.3-92.3 | 1600 | Good wear resistance and high strength, able to endure high impact load; Roughing, semi finishing of refractory steel, high manganese steel, stainless steel and high alloy steel, also suitable to the normal steel and cast iron. | M20/P20-30 |
YW2A | 12.85-13.05 | 91.5-92.5 | 1670 | Good red hardness, able to endure high impact load, is a all-purpose grade. Roughing, semi finishing of refractory steel, high manganese steel, stainless steel and high alloy steel, also suitable to cast iron. | M15/P15 |
ZM15 | 13.8-14.0 | 91-92.2 | 1720 | Good Red Hardness, high strength in use, capable of resisting high impact load. Finishing and semi-finishing of refractory steel, high manganese steel, and austenitic stainless steel, also suitable for Cast Iron. | M15 |
ZM30 | 13.5-13.7 | 90-91.5 | 1890 | High strength in use, capable of resisting high impact load. Roughing and semi-finishing of refractory steel, high manganese steel, stainless steel, etc. | M30 |
ZK10UF | 14.75-14.95 | 92.6-93.6 | 1690 | Fine-grained alloy, good wear resistance and high strength. Semi-finishing and finishing of cast iron and nonferrous metals. It is the unique material for making of solid carbide tools for holing. | K10-K15 |
ZK30UF | 14.3-14.55 | 91.2-92.2 | 2180 | Fine grain grade. Excellent wear resistance, high in strength and impact resistance. Machining of cast irons, nonferrous metals and non-metallic materials. It is the unique material of solid carbide tools for holing. | K30 |
Note: The specification dates just the standard, the actual specification for the products are much better than the standard. |
Suggestion: We would like to recommend suitable grade depending on your machining materials. |
- - - -
?
?
Picture Show:
?
?
Read More
Hubei Fotma Machinery Co., Ltd.
Tungsten Carbide Cutting Tools,Tungsten Carbide Wear Parts,Tungsten Products
Address: Building 3, International Enterprises Center,
Wuhan, Wuchang
China, 430000
Tel: 86-27-67845271
Fax: 86-27-67845262
