Industrial Supplies Agents
Description
ASTM B863 Titanium Mill Products Titanium Alloy Wires for Welding / Redrawing
?
Titanium is primarily alloyed with aluminum, molybdenum, iron and vanadium, as well as other metals. These alloys are used in applications in which lightweight strength and extreme heat resistance are required, such as in the aerospace industry, chemical, petrochemical and general industry.
?
Titanium wire titanium alloy?wire used for redrawing, welding, mesh weaving, making optical frame, needles, electrode, etc.
Titanium wire Specification:
Diameter:?0.1mm-8.0mm (GR5)
Standard:?GB/T 3623-98, ASTM etc.
Note: Application and Supply Condition should be indicated in the contract. We will supply on the condication (Y or M) if not referred in contract.
Standard: ? ?GB/T 3623-98, ASTM etc.
?
Titanium Wire / Titanium Alloy Wire Advantages:
?
1) Smooth finish Ra >0.4um
2) Non-defect
3) High precision (ground surface)
4) Big reel weight (5kg-20kg)
5) Quality reaches the standard of ASTM B348-93 and ASTM B863-95a
?
Titanium / Titanium Alloy Wires?Material Grade Chart:
?
- - - -
?Grade | N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti |
Gr1 | 0.03 | 0.08 | 0.015 | 0.2 | 0.18 | / | / | / | / | / | bal |
Gr2 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | / | / | bal |
Gr3 | 0.05 | 0.08 | 0.015 | 0.3 | 0.35 | / | / | / | / | / | bal |
Gr4 | 0.05 | 0.08 | 0.015 | 0.5 | 0.4 | / | / | / | / | / | ? |
Gr5 | 0.05 | 0.08 | 0.015 | 0.4 | 0.2 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
Gr7 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
Gr9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
Gr12 | 0.03 | 0.08 | 0.015 | 0.3 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
- - - -
?
Titanium Wires Dimension Tolerance
?
- - - -
Diameter | 0.1-0.3mm | 0.3-0.8mm | 0.8-2.0mm | 2.0-6.0mm |
Tolerance | +/- 0.025 | +/-0.04 | +/-0.05 | +/-0.10 |
Length | 200-500mm | 500-1000mm | 1000-2000mm | &2000mm |
Tolerance | +/-1.0 | +/-1.5 | +/-2.0 | +/-2.5 |
- - - -
?
Tensile Requirements:
?
- - - -
Grade | Tensile Strength (min) | Yield strength 0.2%Offset | Elongation in 2in.Or 50mm %?(min) |
Min |
Ksi | Mpa | Ksi | Mpa |
Gr1 | 35 | 240 | 20 | 138 | 20 |
Gr2 | 50 | 345 | 40 | 275 | 18 |
Gr3 | 65 | 450 | 55 | 380 | 18 |
Gr5 | 130 | 895 | 120 | 828 | 10 |
Gr7 | 50 | 345 | 40 | 275 | 18 |
Gr12 | 70 | 483 | 50 | 345 | 18 |
- - - -
?
?
Picture Show:
?
Read More
Hubei Fotma Machinery Co., Ltd.
Tungsten Carbide Cutting Tools,Tungsten Carbide Wear Parts,Tungsten Products
Address: Building 3, International Enterprises Center,
Wuhan, Wuchang
China, 430000
Tel: 86-27-67845271
Fax: 86-27-67845262
