Rubber & Products
Description
Description
HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.
Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
HY-E620 Silicone Rubber is has been used for years to make tire pattern molds .
Characteristics
1.Low shrinkage (less than 0.1% )
2.High tensile and tear strength with high copy times
3.Easy for operation (mixing ratio at 1:1 /10:1)
4.Very good flow and easy for pouring operation
5.Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Operation instruction of HY-E Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
For more information , pls feel free to contact Hugo:
TEL:086-755-89948019
FAX:086-755-89948030
MOBILE:086-15017635728
SKYPE: hugo.chen007
Website:www(dot)szrl(dot)net
E-MAIL:hugochen014(at)gmail(dot)com
Read More
HK Hongye Company
RTV molding silicone,shoe mold rubber,pad printing silicon,silicon oil,107 base,molding silicone rubber,manual mold silicone,candle mold silicone,HTV silicone rubber,liquid silicon
Address: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang,,
shenzhen, Guangdong
China, 518117
Tel: 086 755 89948019
Fax: 086 755 89948030
