Machinery & Equipment
Description
IEC60068-2-75 Spring-operated Impact-test Apparatus Type
IK01
IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
0.14 J 0.2 J 0.35 J 0.5 J 0.7 J 1 J 2 J 5 J 10 J 20 J
1.Introduction:
(1) IEC60068-2-75 Spring Impact Hammer Test Apparatus is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard.
(2)After applying the impact with the hammer, the products is examined with accessibility probes to determine
access to chock,energy,and injury hazards. Built in exact accordance to IEC/EN/UL/CSA and other standards.
2.Application:
Adjust the impact severity by rotating the knurled cap until the desired energy-value is displayed. Pull the knob slowly out of the device until it locks in place. If moved too fast, the clamp may skip its arrester and will lock at its way back when the pulling-force declines. Hold the device horizontally at it’s housing tube and press the (black) release cone to the specimens plane of impact. The strike is automatically released when the release force threshold is reached
Impact energy :
Allowable error: ±10%
The weight of impact element: 250g±5g
The power: <10N
The whole weight: 1250g±10g
Read More
Shenzhen Chuangxin Instruments Co., Ltd
iec test finger, spring impact hammer, gauge, lab equipment
Address: F106, Gongle Fenghe Guard, Xixiang Street, Shenzhen, China,
Shenzhen, Guangdong
China, 518000
Tel: 0086-755-13652324165
Fax: 0086-755-61577693
