Machinery & Equipment
Description
The needle flame tester is used to assess the fire hazard of component materials, determining whether the test flame causes ignition of parts, or if a combustible part ignited by the flame has a limited duration or extent of burning without spreading fire by flames, or burning or glowing particles falling from the test specimen. It is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator:
Fully automatic instrument with safety cabinet.
The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen.
Use with a pressure regulator.
Consists of a 0.9mm needle burner that tilts to 45° from the vertical and is fueled with butane gas, and a tube with a bore 0.5/font>0.1mm and gas-flow regulating valve for adjustment of the flame height.
The test time for the temperature of the standard copper block to increase from 100°C ± 5°C to 700°C ± 3°C shall be 23.5s ± 1.0s.
Test flame height is adjusted 12mm ±1mm.
The instrument is designed to conform to the IEC60695-11-5, IEC60695-2-2 and other most commonly used standards in the market.
Read More
Shenzhen Chuangxin Instruments Co., Ltd
iec test finger, spring impact hammer, gauge, lab equipment
Address: F106, Gongle Fenghe Guard, Xixiang Street, Shenzhen, China,
Shenzhen, Guangdong
China, 518000
Tel: 0086-755-13652324165
Fax: 0086-755-61577693
