Kitchenware
Description
Kitchen Knife Sharpener
Material ABS,TPE, Ceramic, Carbide, Stainless steel
Product Size 190*60*50mm
ENG PRODUCT FEATURES
1.Two stages- coarse and fine-sharpening design
2.Non-skid feet for safe sharpening
3.Ergonomically design, soft-grip handle
4.The grinding head is replaceable, aesthetic and functionality
ENG USING INSTRUCTION
1. Place the knife sharpener on a stable surface when using. one or both of the following steps depending on how blunt the blade is.
Step 1: Coarse sharpening Use this only if your knife is very blunt.Place knives on the coarse stage. Using slight downward pressure, run the blade from its heel to its point through the slot. Repeat three times. Once every six months or as required.
Step 2: Fine honing Always finish off with this step to remove any burrs that result from the re-edging and rough honing process. Without using pressure, run the blade through the fine slot ceramic rods three to five times. You can also use this step on its own to maintain a sharp blade. It is recommended to do it approximately once a week or daily use.
2. After using the knife sharpener, carefully wipe the knife blade with a damp cloth or rinse under running water and dry thoroughly. Clean the knife sharpener with non-abrasive brush.
CAUTION
1. Do not use the knife sharpener to sharpen serrated blades or
scissors.
2. To avoid damaging the knife, please sharpen the knife slightly
and don& acute;t sharpen back and forth.
3. The ceramic rods may discolor. This is normal.
4. Do not put the sharpener in the dishwasher or submerge in
water.
5. Please put the knife sharpener and knife beyond the reach of
children to avoid any accidents.
Read More
Taidea Tech. (Zhongshan) Co., Ltd.
Knife Sharpeners,Sharpening Steel,Whetstone
Address: 3rd Industrial Zone,Zhongshan City,Guangdong Province,
Zhongshan, Guangdong
China, 528400
Tel: 86076086285856
Fax: 86076086983769