Electronic Data Systems
P12.8 Outdoor SMD LED Display for large billboard high performance price ratio
BK-P12.8
Description
?
P12.8? Outdoor SMD LED Display for large billboard high performance price ratio
?
?
Specifications:
?
- - - -
Unit?module | Pixel?pitch | 12.8 mm |
Pixel?density(dots/sqm) | 6104/sqm |
LED?encapsulation | SMD3535 |
Driving?method | 1/2 |
Module?size(mm) | 256*256mm |
Resolution?of?module(?dots) | 20*20 |
Major?technical?parameters | Cabinet?size | 1024*1024mm |
Brightness | 7500cd/?㎡ |
Refresh?rate | >2000HZ |
Color?temperature | 6500K |
View?angle(H/V) | 160°/140° |
Grey?scale | 16bit |
Brightness?adjustment | 256?grade/?Manually/?Automatically |
Working/?storage?temperature | -20℃~50℃/?-30℃~60℃ |
Working/?storage?humidity | 10％~90％?RH |
Working?voltage | AC220/110V?50Hz |
Protect?degree | IP65/IP54 |
MTBF | >5000h |
Life?span | 100000h |
Input?Signal | AV,?S-VIDEO,?VGA,?DVI,?HDMI,?SDI,?DP |
Operation?system | Windows?7/XP |
Control?distance | cat-5?data?cable:<100m,?optical?fiber<15km |
- - - -
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Quick details:
?
?
Pitch: P12.8
module resolution:20*20
module size: 256*256mm
scanning: 1/4 scan
cabinet size:1024*1024mm
?
?
?
Description:
?
?
1. High performance price ratio for large billboard: BAKO P12.8 SMD outdoor LED display can take place of DIP display for outdoor large billboard. It has best performance price ratio.
?
2.?Good waterproof protection: Front is IP65 and back is IP54. There is totally no problem for outdoor application even if there is big rain.
3. Good color uniformity: Since 3 LED chips are encapsulated in one lamp, SMD color uniformity is much better than DIP so the showing effect is perfect.
4. Anti-low temperature: for very cold areas such as Russian market, we should pay special attention to the cold temperature. So we will use anti-low temperature power suppliers and special heat system to warm the display.
5. Good heat output system for high temperature: For hot ares, heat output system is specially important. Or else, the whole display will become hot and there will be dangerous. So we help clients to reduce current and also make add fans for screen.
6. Energy saving: power consumption is a key factor for LED billboard. BAKO’s LED display is designed with low power consumption to help clients to save energy.
7. High brightness: For outdoor application, brightness is important, especially if the LED display faces the sun directly. BAKO’s outdoor display brightness can be above 7500 nits, completely ensure the requirement for outdoor application.
8. Adjustable brightness: In the daytime, brightness should be high. But in the evening, it should be reduced for traffic safety. BAKO’s LED display can make the brightness adjusted automatically. Also, this method can help to save much energy.
9. Both front and rear service: For some special application, front service is a must. BAKO makes new design for SMD outdoor LED display.
?
?
Competitive?Advantage:
?
?
1)?48?hours’?ageing?in?factory?before?shipment
2)?on-site?guidance
3)?free?training
4)?solution?provider
?
Read More
Shenzhen BAKO Optoelectronics Co.,Ltd
Outdoor SMD LED Display,Rental LED Screen,Advertising LED Display
Address: Building 3, Yuyongxing Industrial Zone, Changming Road, Changzhen Community, Gongming Town, Guangming New District,
Shenzhen, Guangdong
China, 518000
Tel: 86-132-46403800
Fax: 86-132-46403800
