Electrical Product Agents
sensitivity adjusted motorcycle alarm immobiliser , Vehicle searching motorcycle bike alarming secur
MT171
Description
Classical LCD 2 way motorcycle alarm system with 2pcs LCD remotes
2 way motorcycle alarm system with remote start stop engine feature remote anti-robbery function
Model No: MT171
Brand:cardot
Features and specifications:
?
1) Remote arming,disarming
2) Vehicle searching
4) Anti-hijacking
5) Engine immobilization
6) Remote engine start stop
7) Waterproof remote control
8) Long remote range
9) Low power consumption
10) Vibration alarm
11) Shock sensor senstivity adjusted
12) Short circuit learning
?
Installation Instructions:
?
1. pink-gray wire:ignition off wire
?
????? normally speaking,as for AC engine off motorcycle,please find ignition mould trigger wire:start motorcycle,and use this gray wire to touch every wire of ignition mould,if motorcycle ignition off,then it is right one wire.cut it and connect the gray wire to the end of ignition mould,pink wire to the other end.
but as for DC engine off motorcycle,don;t need to connect pink engine off wire,it only has two wire,one is red wire,the other is power door lock output wire,it is orange wire.you need to add one 12V DC relay swtich,one end of relay wire coil connects to power door lock output wire,the other end of relay wire coil connects to gray engine off wire of alarm,puplic foot pin of relay switch connects to supplying power foot of lock output power wire,and closing foot pin of relay swtich connects to power foot pin of start ignition module,and then cut supplying power wire of ignition module.
?
2. orange wire:detect power door lock.
?
???? find the output power of lock,like positive of flasher or brake switch and connect them,4 turning light will blink if connection is right.if you connect with negative of flasher or brake switch,turning light will light or automatically turn off when you press the brake.please use this way to find right power door lock output wire.
?
3. blue wire:start wire.
?
??? if your motorbike is positive start mode,directly connects to control wire of start relay,but if your mobile is negative start mode,need to change OEM wire connection to positive start wire connection mode or you can add one 12V DC relay swtich to alarm bule wire,and then make a polarity switch.
?
4. yellow wire(2pcs):direction light wire.
?
???? Left and Right direction light has two wire,one wire connects to ground,the other wire is direction light control wire,connects to direction light switch,connecting alarm yellow wires to control wire of left and right direction light,after finishing connection,press unlock button of remote,if siren will sound bi-bi,direction light flashes,it means that your connection is right.
?
5. red wire:12V
???? directly connects it to positive pole of storage power.
?
6. black wire:ground
???? directly connects it to negative pole of storage power.in order to get better anti-theft,you can connects this black wire to negative pole of other wire,it is hard to find it by thieves.
?
7.?lastly,after finishing all connections,open power door lock,please test direciton light flash or not,shock alarm or not,remote arm/disarm work or not,if abnormal working,please check your connection again.
?
Product Real Photos:
?
?
?
Read More
Shenzhen Cardot Electronics Technology Co.,Ltd
Smart Car Alarm System,Auto Car Alarm System,GSM Car Alarm System
Address: the 6th Floor,Cheng Jia Technology Park,NO.3581,FengXin Road,
Shenzhen, Guangdong
China, 518000
Tel: 86-755-27119211
Fax: 86-755-27119211
