Power Distribution Equipment
Description
SSCT is a smart reactive power compensation device which uses SVG module to control TSC module; it perfectly combines the active module (SVG/APF) and the reactive module via smart control system, achieving continuous compensation without dead zone. It is an optimal solution to reactive power compensation and three-phase imbalance compensation.
SSCT = Smart Controller +SVG modules +TSC modules
Technical Specifications
Power supply voltage - 400 (±20%)V
Power supply frequency - 50 (±10%)Hz
Wiring mode - 3P4W
SVG Module - 50Kvar, 100Kvar
TSC Module - 50Kvar/60Kvar
Target Power factor - 0.99
Compensation mode - Reactive compensation with specific harmonic
Response time - less than 10ms
Overload protection - Auto setting adjustment
Split-phase compensation - 40%~100%
Operation mode - Auto or Manual
Display screen - 7Inch HMI
Communication interface - Optional (RS485/Ethernet)
Protection level - IP20 (More higher protection level to be customized)
Cooling mode - Forced air cooling
Installation site - Indoor use
Noise - <65dB(A)
Altitude - 1000m, if >1000m, the power decreases by 1% every 100m.
Relative humidity - 5%~95%, non-condensing
Dimens
Read More
Zhuhai Sinopak Electric Ltd
Medium voltage variable frequency drives, LV VFD, soft starter, variable frequency inverter, MVLV SVG, statcom, active power filter, apf, active harmonic filter, flameproof vfd
Address: Room 202, Block A, No. 80 Shishan Village, Hengqin Town ,
Zhuhai, Guangdong
China, 519031
Tel: 86-756-7755124
Fax:
