Wires, Cables & Cable Assemblies
Description
1. Production specification range: 0.16 ~ 1.20mm
2. Temperature class GPX-E (E Class 120 °C), GPX-B (B Class 130 °C);
3. Excellent withstand voltage characteristics, breakdown voltage is more than 15KV, access to reinforced insulation (test voltage = 3000Vms, 1min) identification;
4.No need to peel the outer layer that can be soldered directly, the insulating layer developed by our company adopts international leader in nanotechnology, with a direct modification of solderability heat-resistant which is polyester resin and polyamide resin composition. Therefore, direct soldered does not occur such as this kind of fluorine resin insulating layer exposed copper jacket shrinkage phenomenon, excellent solderability, solder temperature 410 ° C ≤ 3S;
5. Special wear resistance and surface smoothness, static friction coefficient≤ 0.133;
6. Good performance on resistant to chemical solvents and impregnating varnish Rating Voltage Rated Voltage (Working Voltage) 1000Vrms, UL
7. In order to distinguish several groups of different winding wire coils, our company can provide more colors triple insulated winding wire according to customers& acute; needs. The standard wire color is khaki, we have several colors as follows: red, green, blue, brown colors. There is no difference among the colors for using. For example, GPX-B is used for a20-wat class transformer and the conventional type. Because of saving the insulators and inner baffles, the transformer could be reduced by approximately half the volume and two-thirds of the weight. This could lead to both material and fabrication cost cuts. Significantly reduced leakage inductance and distributed capacitance, and improving the high-frequency characteristics of the transformer.
Read More
Shanghai Xinyi Electrical Circuit Equipments Co., Ltd.
power cavles
Address: No. 828, Yuegong Road,
jinshan, shanghai
China, 201506
Tel: 0086-21-67276892
Fax: 0086-21-67276896
