Pneumatic Components

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Pneumatic Components

Share us

Bottom Profile Shutter Door Roll Forming Machine With 2.0mm Thickness

LB-180

Send Inquiry

Description

Bottom profile forming machine for rolling shutters doors with 2.0mm thickness

?

Main component of the line:

- - - -
NO. | name | quantity |
1 | Un-coiler (2 tons ) MANUAL | 1 |
2 | roll former | 1 |
3 | Hydraulic cutter | 1 |
4 | PLC control cabinet | 1 |
5 | Output table with rollers(6 meters) | 1 |
- - - -

?

TECHNICAL DETAILS

Un-coiler

?

1. Capacity: 2 tons

2. Material: #45 steel quenched

3. Inner diameter: 410~ 580mm

Main roll former

1. Stations: 20

2. Rollers material: CR 15; HRC 60. Chrome coated: 0.03~0.05mm. The Strength in Mpa: 70 TON,800 MPA

3. Shaft material: Diameter: 50mm, material is #45 steel. Quenched: hot treatment. The strength of the Main Shaft in Mpa:70 tons, 650MPA

4. Bearing brand: FAG Germany

5. Main Motor: 5.5 KW, 380V, 50HZ

?

CHAMICAL COMPOSITION:

- - - -
? | C | SI | MN | P | S | CR | NI | CU | MO | AI | V | B |
Shaft | 0.450 | 0.220 | 0.540 | 0.027 | 0.008 | 0.050 | 0.020 | 0.010 | 0.000 | 0.009 | 0.000 | 0 |
Rollers | 1.00 | 0.32 | 0.33 | 0.011 | 0.003 | 1.49 | 0.05 | 0.00 | 0.02 | 0.041 | ? | ? |
Cutter | 1.57 | 0.34 | 0.38 | 0.022 | 0.010 | 11.10 | 0.18 | 0.14 | 0.48 | ? | ? | ? |
Cut knife | 2.04 | 0.23 | 0.23 | 0.020 | 0.010 | 11.66 | 0.12 | 0.06 | ? | ? | ? | ? |
- - - -

?

PLC Control Cabinet:

1. Touch screen brand: Delta

2. PLC brand: Delta

3. Inverter brand: Delta

4. Main components for low pressure electricity: Schneider Germany

?

Output table

1. Length: 6 meters

2. Drive type: Rollers

CUTTING PLATFORM

1. Cutting type: Hydraulic cutter

2. Motor: 4KW; 380V; 50HZ

3. Material of cut die: CR12MOV; Quenched; the Strength in MPA: 950

Bottom shutters profile forming machine



Main Technical Data

Read More