Instruments & Meters

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Instruments & Meters

Share us

42t Punching Cable Tray Roll Forming Machine 0.6-1.2 Mm Thickness

S&G-Solar Bracket

Send Inquiry

Description

41x41 & 41x21 U shape solar pillar roll forming machine
Specifications:

?

- - - -
Configurations | Uncoiling→ (Perforation machine )→Feeding material into machine→ Punching→ Roll forming→ Auto cutting→ Products receiving N.B: you can choose the Perforation machine and punching part as your demand. |
|
Material | Raw material | colored steel plate, galvanized plate |
Thickness | 0.6-1.2 mm (As customer`s need) |
Feeding width | 300mm-1250mm (According to customer`s profile) |
Material hardness: | 550 Mpa---350 Mpa |
Manual Uncoiler | Inner Diameter | 500-600mm |
Max Coil width | 1500mm |
Capacity | 5T |
Servo feeding and Punching part | Servo feeding power | 3kw |
This part to punch the hole, you can change the dies to punch different holes. |
Punching | 42T |
Die material | Gcr12MoV quenched |
Main Forming machine | Forming steps | 18 stations ( Depend on Profiles ) |
Shaft diameter | Φ70mm |
Design type | Middle plate welded |
Transmission | Gear box (Chain and gear box depend on thickness and customer`s need) |
Machine frame | 350# H steel welded; Steel plate welded/ Memorial arch frame type |
Roller material | Gcr15MoV |
Shaft material | 45# steel with tempering |
Cutting blade material | Gcr12MoV quenched |
Working speed | 10-16m/min |
Power of machine | 18.5KW (According to the thickness) |
Type of cutting | Hydraulic |
Cutting tolerance | ±1mm |
Material of blades | Gcr12 quenched |
Cutter quantity | 1 set |
Working pressure | 20MPA |
Hydraulic cutting system ? | Hydraulic oil | 46# |
Hydraulic power | 7.5KW |
Cutting length | As required |
Frame | Pillar style with rack & pinion system |
Stroke switch | Non-contact photoelectric switch |
The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And two sets of electromagnetism valves. |
Hydraulic oil | 46# |
Hydraulic power | 7.5KW |
- - - -

?

- - - -
Other Spare part ? | Weight | About 14 ton |
Dimension | 10300mm * 1800mm * 1400mm |
Main body color | As required |
Voltage | 380v/50hz/3ph(or as required) |
Spare cutting blade | One piece |
Fuse | 2 pieces |
Relay | 2 pieces |
Travel switch | 2 pieces |
Solenoid valve | 1 pieces |
- - - -

?
? ? ?
?
For the Solar Energy Bracket Main Machine parameters:
1) Forming steps: 18 steps
2) Outer diameter: 70mm
3) Machine frame: memorial arch frame, Thickness of memorial arch frame: 30mm
4) Roller information:
A. Raw material: GCr12MoV
B. Quenched degree: 56-58°C
5) Shaft material: 45# steel with heat treats and hard chrome plated on the surface
6) Main motor power: 18.5kw, Reducer ratio: 1:14, Reducer Type: Hardened reducer
7) With cooling device
Why choose ZT Solar Energy Bracket Machine:
1. High quality roller. This material is made by Gr12 quenching at 58 degree.
2. The shaft we use. It is totally solid, so you do not need to worry, when working; it has bending and effect the accuracy.
3. The gearbox we use. We use gear box as transmission method as your material thickness reached to 3mm. Firstly, it can make sure machine working speed at 16m/min. meanwhile it can make sure machine working long time. By chain, it will loose and break sometime later and by gear, it will work not steady as this.
4. We add water cooling down system to protect machine.

?

Profil Drawing:



Product Image:



?

?

?

Read More