Waste Paper
Description
Polyester Thermal Lamination Film Pouches Hot Laminating Sheets For Price Tag ?
?
?
1. Description:
?
Laminating pouch films use polyester (PET) film as its base film, adhesive (EVA resin) is evenly applied on one side of the film. After special processing, it turned into advanced packing material, and it is widely used for the laminating and protection of material like identification card, historical accounts, photos, pictures, credit cards and important documents.
?
Our laminating pouches range from business card size up to large format A2. We can also customise laminating pouches to your requirements, for example cutting down to a specific size, or punching slots so that you can attach a lanyard or id clip. Check out our laminating pouches section for a wide variety of pouches and accessories.
?
2-3/4& quot; x 2-3/4& quot; (70mm x 70mm)
# ?Finish: Clear/Gloss
# ?Round Corners
# ?Quantity: 100pcs per box
?
2. Specifications:
?
- - - -
Material | PET+EVA |
Type | Glossy/Transparent |
Size | A2,A3,A4,A5,A6,A7,A8, B4, B5 or other any size as customers& acute; requirements |
Thickness | 60mic-250mic/2.4mil-10mil |
Packing | Normally 100 pcs/pack,opp bag+white/color box+carton.(or as customers& acute; requirements) |
- - - -
?
?
?
?
?
?
?
?
?
?
?
?
3. Helpful Hints:?
?
# ?In order to create a lasting seal, you must leave a minimum border of 1/8& quot; on all sides of your document. Trimming the pouch flush to the insert document will expose the edges of the paper and will lead to delamination over time.
# ?If the pouch still appears cloudy after lamination, then the temperature needs to be increased. Working in small increments, increase the laminating temperature in stages until the pouch is completely clear and flat. You can run a cloudy pouch through your laminator more than once in order to fully activate the adhesive without damaging the pouch or the insert document.
# ?If the pouch has a warped or wavy appearance after lamination, then the temperature is set too high and needs to be decreased. After adjusting the temperature, allow the laminator to cool for a few minutes to ensure that it has reached the specified temperature before inserting a new pouch.
?
4.?Features:
?
?
This product is with strong stickiness, anti aging and shrinking, super clear, and used for protection of advertising and construction pictures, etc.
?
It is mainly focuses on the usage of protecting the photos, pictures, graphics etc. from getting staining, polluting, scratching or wet.
?
?
5. Instructions For Use:
?
These laminating pouches are all thermal and require a heated or thermal pouch laminating machine to operate:
# # ?Open the pouch and place the item to be laminated centrally inside the pouch as close to the sealed edge possible.
# ?Insert the pouch, with the sealed edge first into the laminator at the correct temperature.
# ?Allow the pouch to cool to the touch before handling it.
?
6. Why Choose Us:
# ?Professional Manufacturer
# ?More Than 15 Years Experience
# ?OEM/ODM Service.
# ?Products Exported To Europe, United States ,Southeast Asia, Middle East and other countries and regions.
?
?
Read More
Yixing Senwang Lamination Co., Ltd.
Pouch Laminating Film,Sticky Back Laminating Film,Laminating Film Roll
Address: Jiuzhou International Building,No.1 Xincheng Road,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-81728655
Fax: 86-510-81728655
