Electrical Product Agents
10 M / 100 M Full Duplex PoE Ethernet Switch , 8 Port Power Over Ethernet Switch
POE31008PF
Description
10 M / 100 M Full Duplex PoE Ethernet Switch , 8 Port Power Over Ethernet Switch
?
Quick Detail:
?
?
?Product:POE31008PF?
Type:9-Port 10/100M Switch with 8-Port POE and 1-Port Fiber,Single-mode fiber double,SC fiber interface ,IEEE 802.3af,PoE Power Output:15.4Watts,PoE Budget:105Watts
Power Pin Assignment:Data provided over pairs over 1/2and 3/6 ,Power over spare pairs4/5(+) and 7/8 (-)?
?
?
?
Name: POE Ethernet Switch, Power Over Ethernet Switch.
PoE Ports: 8
Transmission Rate: 10 /100 Mbps.
Ethernet Standards: IEEE 802.3af.
PoE Power Output: 15.4 Watts
PoE Budget: 105 Watts
Bandwidth: 1.6 Gbps.
Communication Mode: Full-Duplex & Half-Duplex.
Function: POE, SNMP, VLAN Support
?
>The PoE Switch POE31008PF provides power and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The four RJ45 network ports + one fiber port can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power.
>Advanced auto-sensing algorithm gives power only to IEEE802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the PoE Switch POE31008PF automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink?.
?
Product features
- IEEE 802.3af power on up to 8 ports
- Supply power to wireless access points and surveillance cameras over Cat-5 cabling
- 8 10/100 Mbps Ports with AutoUplink?
-The 9? port? is optical fiber SC interface of 155 Mbps?
- Supports PoE power up to 15.4W for each PoE port
- Supports PoE power up to 105W for all PoE ports
- Supports PoE IEEE 802.3af compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 1K entry MAC address table of the PoE Switch POE31008P with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power adapter supply?
?
Product features
- IEEE 802.3af power on up to 8 ports
- Supply power to wireless access points and surveillance cameras over Cat-5 cabling
- 8 10/100 Mbps Ports with AutoUplink?
-The 9? port? is optical fiber SC interface of 155 Mbps?
- Supports PoE power up to 15.4W for each PoE port
- Supports PoE power up to 105W for all PoE ports
- Supports PoE IEEE 802.3af compliant PDs
- Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
- 1K entry MAC address table of the PoE Switch POE31008P with auto-learning and auto-aging
- LED indicators for monitoring power, link, activity and speed
- External power adapter supply?
?
Target Industries
-HD monitor transmission and power supply
-Wireless AP layout transmission and power supply
-Network telephone transmission , intelligent house and home
system
-Intelligent transportation supervisory system(ITS)
- High-speed Way supervisory/Tele-Communication System
- Security protection system, TV medical treatment
- Long-distance Muti-media Schooling, Campus monitoring
- Long-distance broadcast television transmission system
- High-building Security Protection, Military Tele-Com projects
?
Specifications
?
- - - -
Product | 9-Port 10/100M Switch with 8-Port POE and 1-Port Fiber |
Type | POE31008PF |
Network Ports | 8?10/100Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX |
1 155Mbps SC Ports Single-mode optical fiber |
Power Pin Assignment | Data provided over pairs over 1/2and 3/6 ,Power over
spare pairs4/5(+) and 7/8 (-) |
PoE Distance | 100m |
Transmission Method | Store-And-Forward |
Network Media | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) |
100BASE-TX: UTP category 5, 5e cable (maximum 100m) |
Single-mode optical fiber (Single fiber or double fiber
),maximum 25Km |
Performance Specifications | Bandwidth:1.6 Gbps |
Network latency:Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission |
Buffer memory:96 KB embedded memory per unit |
Address database size:1,000 media access control (MAC) addresses per system |
Addressing:48-bit MAC address |
Mean Time Between Failure (MTBF):190,000 hours (~ 21 years) |
Acoustic Noise: 0 dB |
Network Protocol and Standards | IEEE?802.3i?10BASET |
IEEE?802.3u?100BASETX |
IEEE?802.3x?Flow?Control |
IEEE?802.1af?DTE?Power?via?MDI |
IEEE?802.3af? |
Status LEDs | System: Power, PoE Maximum Power |
Per Port: Link, Activity, Speed, PoE Active, PoE Fault |
Power Supply | Total Power Consumption: 120 W maximum |
PoE Watt budget: 110W |
IEEE802.3af Power Consumption:?105 W maximum (Ports 1 – 8) |
48VDC, 2.3A power output; plug is localized to country of sale |
Physical Specifications | Dimensions (H x W x D):28 x 189 x 109mm |
Weight:0.65kg |
Environmental Specifications | Operating temperature: 0 to 55°C |
Storage temperature: -20 to 75°C |
Operating humidity: 90% maximum relative humidity, non-condensing |
Storage humidity: 95% maximum relative humidity, non-condensing |
Operating altitude: 10,000 ft (3,000 m) maximum |
Storage altitude: 10,000 ft (3,000 m) maximum |
Electromagnetic Emissions | CE?mark,?commercial |
FCC?Part?15?Class?B |
VCCI?Class?B |
EN?55022?(CISPR?22),?Class?B |
Safety | CE?Mark?,commercial |
CE/LVD?EN60950 |
Warranty | 1 years for PoE Switch |
2 years for power supply |
Package Contents | 9-Port 10/100M Switch with 8-Port POE and 1-Port Fiber (POE31008PF) |
AC Adapter |
Installation guide |
Warranty/Support Information card |
- - - -
?
?
Ordering Information:
?
- - - -
POE31008P
8+1: RJ45 ports | 1-8: POE, 9 ports 10/100M, IEEE 802.3af, each port 15.4W, total 120W. |
POE31008P-at
8+1: RJ45 ports | 1-8: POE, 9 ports 10/100M, IEEE 802.3at, each port 25.5W, total 220W, built-in power supply, with hangers, stadard 1U rack. |
POE31008PF
8? RJ45 ports +1 SC SM fiber port | 1-8: POE, 9 ports 10/100M, IEEE 802.3af, each port 15.4W, total 120W. Up-link port is SC SM dual fiber port, 1310nm, transmission distance 25Km. |
POE31008PF-at
8 RJ45 ports +1 SC SM fiber port | 1-8: POE, 9 ports 10/100M, IEEE 802.3at,? each port 25.5W, total 220W, built-in power supply, with hangers, stadard 1U rack. Up-link port is SC SM dual fiber port, 1310nm, transmission distance 25Km.? |
- - - -
?
Product size(mm):279?x?195 x 44mm
?
?
?
?
Read More
Shenzhen Optical Network Video Technology Co., Ltd
PoE Ethernet Switch
Address: Room 1003, Block D, Tairan Building, Chegongmiao, Futian District,
Shenzhen, Guangdong
China, 518000
Tel: 86-755-33376072
Fax: 86-755-33376608
