Movie
Marine inflatable floating rubber pneumatic yokohama fender Passed ISO 17357
3.3 D X 4.5 L
Description
?
?
Marine inflatable floating rubber pneumatic yokohama fender ?Passed ISO 17357???
?
All our pneumatic marine?rubber fenders are manufactured and tested in accordance with ISO17357:2002.
?
Major?Strengths?Of?Our?marine ?rubber ?fender:
?
1.?High?safety?level:?our?pneumatic?fenders?can?stand?the?maximum?pressure?up?to?4?times?that?of?the?operating?pressure.
?
2. ?Easy?maintenance:?our?fenders?just?need?inflation?once?every?six?months.
?
3.?Low?transportation?cost:?our?fenders?can?be?deflated?and?folded?for?transportation,?thus?saving?about?two?thirds?of?the?transportation?cost.
?
4. Long?lifespan:?it?is?guaranteed?that?our?fenders?can?be?used?for?over?10?years?under?normal?conditions.
?
marine ?rubber ?fender?Description:
?
Pneumatic fenders are ideal for permanent & semi-permanent port applications where there is a solid faced quay structure or suitable supporting frame i.e. ideal in the situations where a fixed fender is not applicable such as to Ship-To-Ship (STS) operations off shore and some Ship-To-Wharf (STW)
operations and suitable for the use at a quay where the tidal range is large. Since pneumatic fenders are very easy to install, they can quickly be redeployed to wherever they are needed.
?
These pneumatic fenders are also useful as supplementary protection and for special vessels where the permanent fixed fenders may be unsuitable.
?
Manufactured as per ISO 17357 with 0.5 kg/cm2 and 0.8 kg/cm2 internal pressure, these Fenders are extensively used for ship to ship transfers at mid sea, as well as vessel to berth at dock/jetty.?
?
marine ?rubber ?fender?Specifications and sizes :
?
The?guaranteed?energy?absorption?of?marine?rubber?fenders?are?the?energy?absorption?at?60%?deflection.?This?value?can?be?use?in?engineering?design?and?actual?operation.?Table?gives?the?sizes,?weights?and?technical?performance?of pneumatic marine rubber fenders.
?
- - - -
Nominal?size (DxL)meter | Initial?internal?pressure?Po=0.05Mpa | Initial?internal?pressure?Po=0.08Mpa |
Load (kg) | R (KN) | Energy (KJ) | Load (kg) | R (KN) | Energy (KJ) |
0.5x1.0 | 25 | 64 | 6 | 25 | 83 | 8 |
0.6x1.0 | 32 | 74 | 8 | 32 | 96 | 11 |
0.7x1.5 | 50 | 137 | 17 | 50 | 178 | 24 |
1.0x1.5 | 80 | 182 | 32 | 80 | 235 | 44 |
1.0x2.0 | 100 | 257 | 45 | 125 | 335 | 63 |
1.2x2.0 | 120 | 297 | 63 | 165 | 386 | 86 |
1.35x2.5 | 165 | 427 | 102 | 226 | 554 | 140 |
1.5x3.0 | 315 | 597 | 153 | 370 | 751 | 211 |
1.7x3.0 | 405 | 639 | 191 | 436 | 830 | 263 |
2.0x3.5 | 590 | 875 | 308 | 632 | 1138 | 424 |
2.5x4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
2.5x5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
3.0x5.0 | 1880 | 2104 | 1210 | 2155 | 2700 | 1571 |
3.0x6.0 | 2160 | 2583 | 1485 | 2470 | 3292 | 1888 |
3.3x4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
3.3x6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
3.3x6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |
- - - -
?
?
?
Storage?for?marine ?rubber ?fender
?
*When?not?using?for?a?long?time,wash?the?surface?of?the?fender,dry?up?and?fill?in?sufficient?right?amount?of?compressed?air?to?lay?them?in?a?cool.dry?and?well-ventilated?place.
*The?storage?place?of?pneumatic?rubber?fender?should?be?far?away?from?hear?source
*Try?to?keep?fender?away?from?acid,alkali,grease?and?organic?solvents
*When?not?applying?the?fenders,the?pneumatic?rubber?fender?can’t?be?piled?up?and?heavy?items?can’t?be?piled?on?the?fender
?
?
Our?marine ?rubber ?fender
?
Founded in 2003, Shandong Nanhai Airbag Engineering Co., Ltd. (“Nanhai”) is a full-service provider of airbags and pneumatic fenders, covering R&D, manufacture and distribution. Our airbag products are used for ship launching, buoyancy, and heavy lifting and moving with remarkable advantages over traditional steel-based methods.
Having passed the QMS certifications of BV and ISO 9001, our products have been exported to more than 40 countries and regions around the world, being widely used in the fields of ports, ocean engineering, ships and tunnels. Last but not the least, Nanhai is a qualified vendor of airbags and related products to China National Offshore Oil Corporation (“CNOOC”).
?
?
?
?
?
Any questions please feel free to contact me at any time.?
Website:www.airbag.cc ?www.nanhaiairbag.com?
Tell:+86 0531 58775198
?
Email:sales@airbag.cc
?
?
?
?
Read More
Shandong Nanhai Airbag Engineering Co., Ltd.
Pneumatic Fender,Yokohama Fender,Ship Launching Airbag
Address: 59 Gongye Road South, Room 403, Building No. 2, China Railway Fortune Center, Jinan City, Shandong Province, China,
Jinan, Shandong
China, 250000
Tel: 86-531-58775198
Fax: 86-531-58775188
