Cast & Forged
±0.01mm Portable CNC Flame Cutting Machine Aluminium Auto Gas CNC Cutting Machine
YH1530
Description
?
Control Accuracy ±0.01mm Aluminium Auto Gas Cnc Cutting Machine
?
Description:
?
The Portable cnc plasma cutting machine made in China is free to move, not accounting for fixed venue. Widely used in automotive, shipbuilding, petrochemical, boiler and pressure vessel, engineering machinery, light machinery and other industries, especially for single-piece contoured surface and mass production.
?
Features:
?
1. Machine design simple.
2. Cantilever structure, welding after the vibration aging treatment to eliminate stress, so that in the long-term use of no deformation.
3. All mechanical drive system using rolling bearings and precision machining accuracy as 6 GB of precision gears mesh with the rack
4. Planetary reducer drive system, its input and output error of only 16 arc minutes, at the same time, in the horizontal and vertical structure of the gear drive, an increase of automatic clearance compensation device so that it can accurately drive the structure of the implementation of the directives issued by the CNC.
5.Take the initiative to end beam: vertical track for the introduction of automatic clamping device-oriented structure and there are no eccentric clamping structure, relying on automatic detachable power-oriented structure to make it two in the track combined with the smooth running of the Department will not have a wheel clamp tight or lax-phenomenon.
6. All the equipment looks to see, such as steel, screws, using black or chrome handle.
?
Technical Parameters for Portable CNC Cutting Machine:
?
- - - -
1 | Cutting shape | any shapes |
2 | LCD Display Dimension | 7.0Inches |
3 | Effective Cutting Width (X axis) | 1500mm |
4 | Effective Cutting Length (Y axis) | 3000mm |
5 | Cross Beam Length | 2000mm |
6 | Longitudinal Rail Length | 3500mm |
7 | Cutting Speed | 0-4000mm per minute |
8 | Plasma Cutting Thickness | 0.5--20mm ( Depends on plasma power source capacity) |
9 | Flame Cutting Thickness | 5--200mm |
10 | Drive Mode | single-side |
11 | Cutting Mode | flame and plasma |
12 | Ignition device | Auto ignition device |
13 | Height regulating device | Arc voltage height control (THC) or Electric adjustable high |
14 | File transmission | USB transmission |
15 | Gas Pressure | Max. 0.1Mpa |
16 | Oxygen Pressure | Max.0.7Mpa |
17 | Cutting Gas | Acetylene/Propane |
18 | Plasma Power Source | Yahong cut-100A,cut-130A, cut-200A or other |
19 | Plasma Air | Only pressed Air |
20 | Software | FastCAM Standard vision(support Auto CAD/ Solidworks/ CAXA/ Types etc.) |
21 | Plasma Air Pressure | Max. 0.8Mpa |
22 | Cutting precision | ±0.5mm National standard JB/T10045.3-99 |
23 | Control accuracy | ±0.01mm |
24 | Power Supply Voltage/Frequency | 220V 50HZ / 60HZ |
25 | Rated Power Supply | 200W |
26 | Working Temperature | -10℃-60℃, Relative Humidity, 0-95%. |
- - - -
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Our Services:
?
1. Professional engineering and technical personnel. We will provide you with reasonable and valuable Suggestions and solutions according to your requirements, the engineering feasibility and economic benefit etc .
2. Provide knowledge of equipment operation and maintenance,Allows you to accurately grasp the characteristics of the machine.
3. 13 months?warranty. Please feel free to use.
4. Supply all kinds of accessories and replacement.
?
Portable CNC Cutting Machine:
?
Read More
Xuzhou Yahong CNC Equipment Factory
Table Plasma Cutter,Plasma Source,Cutter Spare Parts
Address: Room1421 . Greenland Business Building LOFT C. , new urban district , Xuzhou , Jiangsu,
Xuzhou, Jiangsu
China, 221000
Tel: 86-0516-83356037
Fax: 86-0516-83356037
