Electronics Agents
Description
?
Pipe Cutting and beveling Machine:
?
The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, single point, counterbore and flange facing operations, as well as weld end preparation on open ended pipe, Ranging from 2” to 48” O.D.(DN50-1200), on most wall thicknesses and material.
?
?
?
Features
?
# Split Frame
# Cold Cutting/Beveling improve safety
# Cut or Cut/Bevel simultaneous
# Low Axial & Radial Clearance
# Tool feed automatically
# Easy install & Operation
# Pneumatic, Electric and Hydraulic type for option
# Machining OD of pipe from 2” up to 48”
?
?
?
Application
?
# Oil & Gas File
# Power Plant
# Chemical Plant
# Nuclear Power Plant
# Process Plant & Fabrication
# Ship Building & Repair
?
?
?
Specification
?
# Driven options: Pneumatic, Hydraulic or Electric
# Air requirement: 1500L-3000L/Min@0.6/0.7Mpa
# Hydraulic requirement: 2-60L/Min@12.5Mpa
# Electric requirement: 220-240V 1PH 50/60HZ
# Feed mode: Star wheel, automatically
# Feed rate: Fixed@0.08mm per circle
# Packaging: Plywood case
?
?
?
Selection Guide
?
?
- - - -
Model | Working Range (OD) | d (mm) | D(mm) | L (mm) |
Inch | mm | Steel body | Aluminum body |
168 | 2”-6” | 50-168 | 185 | 512 | 178 | 192 |
230 | 3”-8” | 80-230 | 236 | 564 | 178 | 192 |
275 | 5”-10” | 125-275 | 283 | 612 | 178 | 192 |
325 | 6”-12” | 168-325 | 334 | 665 | 178 | 192 |
377 | 8”-14” | 219-377 | 386 | 719 | 178 | 192 |
426 | 10”-16” | 273-426 | 438 | 776 | 180 | 195 |
457 | 12”-18” | 300-457 | 469 | 807 | 180 | 195 |
508 | 14”-20” | 355-508 | 518 | 862 | 190 | 195 |
560 | 16”-22” | 400-560 | 570 | 910 | 190 | 195 |
610 | 18”-24” | 457-610 | 618 | 960 | 190 | 195 |
660 | 20”-26” | 508-660 | 670 | 1020 | 190 | 195 |
715 | 22”-28” | 550-715 | 719 | 1084 | 190 | 198 |
762 | 24”-30” | 600-762 | 770 | 1134 | 190 | 198 |
830 | 26”-32” | 660-813 | 830 | 1194 | 192 | 207 |
914 | 30”-36” | 762-914 | 924 | 1296 | 212 | 214 |
1066 | 36”-42” | 914-1066 | 1077 | 1468 | 212 | 216 |
1230 | 42”-48” | 1066-1230 | 1248 | 1646 | 212 | 216 |
- - - -
?
Suggest: size 1066 and above size select and use hydraulic type
?
?
?
Typical Buttwelding Joint
?
Suggest: if any other welding seam or special demand, please better to advise us before you place the order.
?
?
?
Order Guide
?
Before you place order to us, please let us know the following information:
#
Choose the right size
#
Advise us the driven options: Pneumatic, Electric or Hydraulic
#
Advise us the body options: Steel body or Aluminum body
#
Confirm electric power supply ( Voltage, frequency and phase)
#
Confirm the beveling angel required
#
Confirm the welding joint required (U, V, Double V or Compound preparation)
#
Advise your pipe material ( Carbon steel, stainless steel or others)
#
Other special demands about machine
#
The spare parts needed
#
If the pipe wall thickness more than 30mm, inform us in advance (Important)
?
?
?
Working On-site
?
?
?
?
Exhibition
?
?
?
?
Packaging
?
?
?
?
After-sale Service
?
# # ?Warranty period: 12 months(Electric motor 6 months)
# Emergency spare parts required dispatched within 24 hours
?
?
Read More
Nodha Industrial Technology Wuxi Co., Ltd
Plate Edge Milling Machine,Pipe Chamfering Machine,Pipe Beveling Machine
Address: ROOM 1203, BLOCK A, NO.58 LIANGQING ROAD, WUXI, CHINA,
Wuxi, Jiangsu
China, 214000
Tel: 86-510-85808562
Fax: 86-510-85808563
