Medical Equipment
Description
How to use
1.Open the valve of oxygen cylinder after connect the screw nut of air intake closely.
2.Connect the oxygen pipe to the oxygen outlet firmly.
3.Demount the humidifying cup(anti clock wise rotation),put some distilled water in (purified water or plain boiled water can also take place),the water quantity should be between the bottom and top tick mark,then tighten up the bottle cap to the humidifying cup(clockwise rotation).
4.Rotate the flow regulating valve to the rate you need (anti clockwise to up,clockwise to down,till to close),then put it to nose to use.
5.Close the valve of oxygen cylinder firstly while not using,then close the flow regulating valve until the pointer of oxygen manometer return to zero.
Attention
1.Make sure there is no ash on the connector and check the screw thread,then install the inhalator.
2.Make sure the flow meter is vertical to the floor and flow regulating valve is closed,then open the valve of oxygen cylinder slowly,regulate the flow after the high pressure gauge shows the pressure of the oxygen cylinder.
3.No drastic shock,far away with the corrosive substance,and no oil stain.
4.The set screw of the safety valve can& acute;t be rotated at random,non-professional people are forbidden to dismount.
Read More
Ningbo Yucai Medical Co., Ltd.
Medical Oxygen Regulators, Medical Gas Delivery and Suction Systems, Humidifiers, Pressure Gauges, Reductors, Flowmeters,Cylinder Valves, Gas Cylinders, Welding and Cutting Equipme
Address: No.285 West Shun Da Street ,
Ningbo, Zhejiang
China, 315400
Tel: 008618766361779
Fax:
