Other Packaging & Paper

1. Home
2. Products
3. Packaging & Paper
4. Other Packaging & Paper

Share us

Solar Chamber

No.1-1

Send Inquiry

Description

Bay Area Test Equipment Inc is one of the leading solar chamber manufacturers and suppliers,Website:http://www.bacldesign.net, welcome to buy and wholesale cheap and best solar test chambers from us.


BTH Series Solar Test Chamber ?


Solar test chamber reliability test of solar cells in the specification to be verified in wet, frozen, temperature cycle, humidity test etc can be monitored during the experiment the continuity of the internal circuit of solar cells in order to determine whether the fault or failure, by the system solar battery failure can be determined. ?


Test Model or test project


1). Damp Heat Test:


Test Condition: ? 95 ±2 oC temperature range, and 95% ±5% R.H. humidity range?


Test Duration: last for 1000H,?


Test Purpose: To see the reliability of the module to withstand the effects of long-term penetration of heat and humidity.?


2). Humidity-freeze test ?


Test Purpose: to see the ability of the module to withstand the effects of high temperature and humidity followed by sub-zero temperatures.


Test points and requirements:


-40oC lowest temperature and 85oC highest temperature?


Max temperature rising speed rate:200oC/Hour=3.33/min


Max temperature falling speed rate:200oC/Hour=3.33/min


24 hours per cycle, testing for 10 cycles, 240 hours (10 days)


3). Thermal cycle test;


Test requirements: -40oC lowest temperature and 85oC highest temperature


Temperature falling/rising speed rate:100oC/Hour=1.67oC/min,6 hours per cycle,?


Test Duration: 50~200 cycles


total testing time last 300 to 1200 hours (12.5 to 50 days)?


Applicable standards


IEC61646, IEC 61625, IEC 62108, IEC 61625,UL 1703,






Temp.?Cycle?


Compare




High?Temp.?

Read More