Rubber & Products
Description
Description of platinum cured silicone rubber
platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .It’s mainly suitable for tire molds making .
Advantage of platinum cure silicone rubber for tire mold
1) Non- shrinkage
2) high tensile and tear strength with high copy times
3) exceptional fluidity and good operability (mixing ratio at 1:1 )
4) high temperature resistant in 250 Centigrade
Operation instruction of platinum cure silicone rubber for tire mold
Step One: Take 100g of part A and 100g of part B and mix in 1:1 and mix the two part evenly.
Step Two: vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly .
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
,200 kg/drum for part A+ 200kg/drum for part B in one set
Contact Ms Mandy for more information :
hyjd(at)szrl.(dot)net , skype hyjmandy.tom.com or call 0086-18938861892
Read More
Shenzhen Hong Ye Jie Technology Co., Ltd.
Silicone Rubber
Address: Building A, No.3,Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District,Shenzhen, Guangdong, China,
Shenzhen , Guangdong
China, 518117
Tel: 86-755-89948294
Fax: 86-755-89948030
