Laser Equipment

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Laser Equipment

Share us

HDG Steel Polygonal electric power pole , Double Circuits Strain power transmission poles

BS/EP - 06

Send Inquiry

Description

?
10KV Double Circuits Strain Pole , HDG Steel Polygonal Electrical Power Pole in Transmission Line
?
Specification?
?

- - - -
Type | Straight Pole ,Tensile Pole ,Turn Pole |
Applicant | Electrical Transmission Line and Distribution? |
Shape | Round ,Multi-pyramidal , polygonal or conical |
Material | Applied to the material of general-purpose steel GB/T1591-2008, Q235, Q345 used in China.
Q235 equipment to SS400. Min Yield Stress 235 Mpa.
Q345 equivalent to S355JR. Gr 50. Min Yield Stress 345 Mpa.
Others material steel Q420, Q460 provided according to customers& acute; request. |
Tolerance of dimension | +- 2% |
Power | 10 KV? |
Max Ice Thick? | 10mm |
Design Load in Kg | 1080 Kg applied to 60cm from the top pole |
Surface treatment | Hot dip galvanized in accordance with ASTM A 123. Min Zinc Coating 86 Microns. |
Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
Design of pole | Against earthquake of 8 grade |
Wind Speed | 160 Km/Hour . 30 m /s |
Minimum yield strength | 355 mpa |
Minimum ultimate tensile strength | 470 mpa |
Max ultimate tensile strength | 630 mpa |
Standard | ISO 9001 : 2008 |
Length of per section | Within 14m once forming without slip joint |
Welding | Welding complies with AWS D1.1 standard. |
Thickness | 2.5 mm to 30 mm |
Production Process | Raw material test → Cutting →Molding or bending →Welding
(longitudinal )→Dimension verify →Flange welding →Hole drilling
→Calibration→Galvanization or powder coating ,painting
→Recalibration →Thread →Packages |
- - - -

?
?
?
Description:
Standard Accessories
- Top Cap
- Base plate
- Bottom strip
- Standard hole
- Climbing rung
- Anchor bolt
- Bituminous protection
- Painted marking
- Removable ladder
- Grounding Nuts & Bolts
?

?
?
Production Process
?
# Raw material test
# Cutting
# Bending
# Welding?(longitudinal )
# Dimension verify
# Flange welding
# Hole drilling
# Calibration
# Deburr
# Galvanization or powder coating or Bituminous painting
# Recalibration
# Packages

?
Material Test:
1. All of our material are purchased from famous mill factory to assure the quality.
?
2. A mill certificate issued by the mill factory with stamp and signature must be provided before
unload the material in our factory;?
3. Before put into production, all the material must pass the chemical and physical analysis to
make sure that they have met the requested strength and component.
?
?
Terms and Conditions
?
1. Price Term: EXW, FOB, CFR or CIF.
?

? EXW: Poles Cost

? FOB : Pole Cost + Land Transportation + Fee on Port

? CFR : Pole Cost + Land Transportation + Fee on Port + Sea Freight

? C I F : Pole Cost + Land Transportation + Fee on Port + Sea Freight + Insurance.

?

2. MOQ: One 40FT Container.


3. Payment Term: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated.


4. Delivery Time: 15 working days per container after PI / drawing / prepayment confirmed.


5. Package: Normally wrapped by plastic bags or burlap cloth at the top and bottom,or according to clients’ requirement.

?

?

?
Company Introduce:?
?
Through the efforts of the company staff, the support and cooperation from all over the world. The company& acute;s products have been exported to Philippines, Malaysia, Australia, America, Africa, Latin America, Panama, Suriname, Costa Rica, Colombia, Jordan, Nigeria, etc. We have good export experience and with 1 container export to World in average every day.
?

Read More