Power Supplies

1. Home
2. Products
3. Electronic & Electrical
4. Power Supplies

Share us

345KV single circuit tower

MGP-345SCT

Send Inquiry

Description

345KV SINGLE CIRCUIT STEEL TOWER
Compared the freestanding framework self-supporting tower, the guyed lattice masts are normally guyed in three directions equally spaced 120 degrees apart over an anchor radius of typically 2/3 of the tower height, The mast construction consists of triangular lattice modular section, each module fully welded tubular leg and solid round bar bracing incorporating integral step rungs fabricated into the lattice framework on one face this removes the need for a separate ladder. All masts sections are hot dipped galvanized after fabrication. Mast heights range 9 up to 50 meters, these masts can also be Etched primed and powder coated as an optional extra if required. Megatro provide every type of 345KV single circuit guyed tower for our client, which carries conductors for only one circuit and tower supported by guyed wire.
We have main advantages in tower designs, and our main design engineer from USA, can use PLS software to design every type steel tower based on structural calculations and geometrical frame drawings. To meet the expectation, we produce shop drawings, components list and full production documentation, and even complete 3D models that facilitate the elimination of all design and drawings errors generated on the drawings. Another advantage is our 3D design and loading & design report, and can optimized the design and save cost for our clients. Then we can calculate the guyed tower loading and choose reliable guyed wire and tower shape for our client.
Moreover, MEGATRO had professional QA &QC team to control quality and execute strict QC & QC plan as per client requirements. MEGATRO is one of the few manufactures who assemble a face of 345KV single circuit guyed steel tower. After fabrication all 345KV single circuit guyed steel tower are delivered to the galvanizing facility to be Hot DIP Galvanized.

Read More