Network Communications
Description
Antenna masts and towers are, typically, tall structures designed to support antennas (also known as aerials) for telecommunications and broadcasting including television. They are among the tallest man-made structures.
Our MEGATRO antenna mast and tower are designed to support up to some antennas as per client required, either UHF or VHF, for ground to air communications at airports or remote air traffic control sites. The towers are designed to the requirements of TIA/EIA-222-F, 105 MPH to 240MPH wind load. The self-supported towers come in 10 and 20 feet bolted sections and vary in height from 20 to 70 feet. A guyed version is available in 70, 80, 90 and 100 feet heights. The self-supported and guyed towers are offered as knock-down or assembled sections.
We have SST antenna tower, guyed antenna tower or other types as per client data or our design.
MEGATRO antenna masts and towers also fabricated by solid steel pipe with angle or bracing members, which provides great strength, low weight and wind resistance, and economy in the use of materials. Lattices of triangular cross-section are most common, and square lattices are also widely used.
After fabrication all towers are delivered to the galvanizing facility to be Hot Dip Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
Read More
Qingdao Megatro Mechanical and Electrical Equipment Co., Ltd.
power transmission tower, telecom tower, wind turbine, wind tower and mast, lamp post, high mast pole, steel house, steel building, wind power flange, steel stucture
Address: 288, Zhuhai Road, Huangdao district, Qingdao city, Shandong Province, China ,
qingdao, Shandong
China, 266400
Tel: 86-532-55588298
Fax: 86-532-55588276
