Power Supplies
Description
An electricity pylon or transmission tower is a tall structure, usually a steel lattice tower, used to support overhead electricity conductors for electric power transmission. They are used in high voltage AC and DC systems as well as railway traction, and come in a wide variety of shapes and sizes.
Transmission Tower structures can be classified by the way in which they support the line conductors. Suspension structures support the conductor vertically using suspension insulators. . Strain structures resist net tension in the conductors and the conductors attach to the structure through strain insulators. Dead-end structures support the full weight of the conductor and also all the tension in it, and also use strain insulators.
Where the power transmission line must change direction, then angle towers are used. Structures are classified as angle suspension, angle strain, and angle dead-end.
MEGATRO fabricates every structure angle towers by solid steel legs and angle iron cross members & pipes. Structures can reach heights up to 200 meter. MEGATRO is one of the few manufactures who assemble a face of every tower section. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.
After fabrication all angle towers are delivered to the galvanizing facility to be Hot Dip Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.
Read More
Qingdao Megatro Mechanical and Electrical Equipment Co., Ltd.
power transmission tower, telecom tower, wind turbine, wind tower and mast, lamp post, high mast pole, steel house, steel building, wind power flange, steel stucture
Address: 288, Zhuhai Road, Huangdao district, Qingdao city, Shandong Province, China ,
qingdao, Shandong
China, 266400
Tel: 86-532-55588298
Fax: 86-532-55588276
