Power Supplies
Description
138KV typical tubular angle anchor structure
MEGATRO provide fabrication and design of 138KV typical tubular angle anchor structure for our overseas clients. This type structure foundation adopt anchor bolts connect with structure base plate and stub legs. Structure foundation belongs to precast concrete foundation with template and anchor bolts underground. And this structure was made of hollow pipe, which can be quickly deployed with minimal hardware and labor, factory drilled to customer specifications or modified in the field, if required, using a carbide-tip bit. In general, this type of pole fabricated with mild steel or high strength steel, such as ASTM A36, ASTM A572 GR50, GR65, Q235B, Q345B, S355JO, S355JR, ST37, ST52, BS 50B or other.
Our 138KV typical tubular angle anchor structure with some type as follow:
(1) Flange connection
(2) Slip joint
(2) Step type
(3) Stagger type
(4) Others
Pole foundation types have:
(1) Direct embedment
(2) Anchor bolt
(3) Based plate
(4) Vibratory steel caisson
MEGATRO provide Series 138KV typical tubular angle anchor structure
at a much lower material cost than self supporting towers due to the efficient use of steel guy lines, The guyed lattice masts are normally guyed in three directions equally spaced 120 degrees apart over an anchor radius of typically 2/3 of the tower height or as per client special requirements.
Read More
Qingdao Megatro Mechanical and Electrical Equipment Co., Ltd.
power transmission tower, telecom tower, wind turbine, wind tower and mast, lamp post, high mast pole, steel house, steel building, wind power flange, steel stucture
Address: 288, Zhuhai Road, Huangdao district, Qingdao city, Shandong Province, China ,
qingdao, Shandong
China, 266400
Tel: 86-532-55588298
Fax: 86-532-55588276
