Power Supplies

1. Home
2. Products
3. Electronic & Electrical
4. Power Supplies

Share us

132KV DOUBLE CIRCUIT ANGLE DIVIATION TOWER

MGP-132AT

Send Inquiry

Description

132KV DOUBLE CIRCUIT ANGLE DEVIATION TRANSMISSION STEEL TOWER
A double-circuit transmission line has two circuits. For three-phase systems, each tower supports and insulates six conductors. Single phase AC-power lines as used for traction current have four conductors for two circuits. Usually both circuits operate at the same voltage. In HVDC systems typically two conductors are carried per line, but rarely only one pole of the system is carried on a set of towers. And in power transmission line, it must change direction, then steel angle deviation Towers are used. Structures are classified as angle suspension, angle strain, and angle dead-end.
Both tubular and lattice angle steel towers can be designed so as to support two circuits of electrical current. Double-circuit towers hold the different conductors stacked atop one another, while in single-circuit towers the conductors are lined up horizontally.
MEGATRO provide 132KV double circuit angle deviation tower for our esteemed clients. The Tower Line work involves Survey, check survey, and span calculations essential for tower extensions. Moreover, Tower designs and prototype approval is done. 132KV double circuit angle deviation transmission steel tower mainly supply to our foreign client.
MEGATRO is one of the few manufactures who assemble a face of double circuit transmission tower. This attention to quality may not be the cheapest process but it does insure every tower meets our high standards of quality. And it helps to reduce on-site construction cost due to mismatched assemblies.

After fabrication all double circuit transmission tower are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.

Read More