Machinery & Equipment
Description
Powder coating
Powder coating comes in two variants:
Thermo curing
Thermo plastic
Both have their advantages and their different ways of being applied as well as heat treated after application. We have a wide experience with both systems.?
Contact us for more info on this type of system or just see who your contact person is in your country.
Thermo curing
Thermo curing is most often electrostatically applied by spraying in a booth provided with a recovery system with cyclone or with filter only. Often the booth system used is a fast colour change system.
After application the powder is cured in an oven either infrared or convection or a combination, at approximately 80-220 oC.
Thermo plastic
Thermo plastic powders (like e.g. nylon) are wide applied by dipping (sintering) in a fluidized powder hopper.?
The products are then preheated to 200-300 oC and dipped into the powder.
Often no further process is needed.
This process is used when the products have a need for a thicker layer or when the products have a complex interior geometry.
Read More
Huzhou Lianzhong Machinery Co.,Ltd
Powder coating plant,electrostatic powder coating machine,powder coating equipment,powder coating line
Address: 125 shimin Road ,Anji county,
Huzhou, Zhejiang
China, 313200
Tel: 0086-572-5025369
Fax: 0086-572-5025369
