Minerals & Metallurgy Projects
High Pressure Clockwise Low noise Rotation Axial Piston Pumps 100cc for Boat / Excavator
A10VSO18/28/45/71/100/140
Description
?
High Pressure Clockwise Low noise Rotation Axial Piston Pump for Boat / Excavator
?
?
Quick details
?
OEM High Pressure Tandem Hydraulic Pump
displacement 71cc/100cc
Clockwise Rotation
Low noise, Small Volume
for Hydraulic system. Ship Hydraulic system
?
?
Parameter
?
?
- - - -
Operating pressure range | Pressure at port B |
~ inlet | Nominal pressure PN----------------280bar |
? | Peak pressure PMAX-----------------------350bar |
Absolute pressure at port S | Clearance work pressure (10% cycle)---------315bar |
??P abs min------------------------0.8bar | Applications with intermittent operating pressures up to |
? P abs max------------------------30bar | 215 bar at 10% duty are permitted . |
- - - -
???? Case drain pressure
Maximum permissible pressure of leakage fluid (at port L,L1):Maximum0.5 bar higher than
The inlet pressure at port S,but no higher than 2 bar absolute pressure.
?
?
Applications:
?
Hydraulic system. Ship Hydraulic system.
?
Specifications:
?
Maximum permissible pressure of leakage fluid (at port L,L1):Maximum0.5 bar higher than
The inlet pressure at port S,but no higher than 2 bar absolute pressure.
- - - -
Specifications: | ? | ? | ? | 16/18 | 28 | 45 | 71 | 100 | 140 |
Displacement | ? | Vg? max | cm3 | 18 | 28 | 45 | 71 | 100 | 140 |
Max speed | ? | nmax | rpm | 3300 | 3000 | 2600 | 2200 | 2000 | 1800 |
Max. flow | in? nmax | qv | L/min | 59.4 | 84 | 117 | 156 | 200 | 252 |
in 1500 r/min | 27 | 42 | 68 | 107 | 150 | 210 |
Max. power (Δp=280bar) ? | in nmax | Pmax | Kw | 27.7 | 39 | 55 | 73 | 93 | 118 |
in 1500 r/min | 12.6 | 20 | 32 | 50 | 70 | 98 |
Max. torque (Δp=280bar) ? | in Vg? max | Tmax | Nm | 80.1 | 125 | 200 | 316 | 445 | 623 |
Weight | ? | m | Kg | 12 | 15 | 21 | 33 | 45 | 60 |
- - - -
?
Axial piston pump, displacement is 18cc/28cc/45cc/71cc/100cc/140cc.
Pressure and Flow control
Clockwise Rotation
Perbunan seals
Splined shaft
SAE 2 hole UNC inch thread
Thru-drive Rear Cover, can connect another pump
?
?
Advantage:
?
Good quality, Competitive price and quick delivery.
Low noise, Small Volume
?
?
?
?
Description:
?
- - - -
Ordering Code | Detail |
HA10V(S) | Model? Variable pump,Swashplate? design? | Rated pressure 280bar? | Peak pressure 350bar | |
O | Mode of operation Pump,Circuit??? | | | |
28 | Displacement 18 . 28 . 45 . 71 . 100 . 140(ml/r) | | | |
DR | Two point ,direct control??? ,DRG---?????? Remote pressure control | Pressure control,Pressure and flow control | DFR1? Pressure and flow control ,Orifice in X-channel closed | Pressure . flow and torque control? |
/ | | | | |
31 | Series:? 31 Series | | | |
R | ?Direction of rotation? R---? Clockwise | ???????????????????????????????????????????????????????????????????????? L---? Anti-clockwise | | |
- | | | | |
P | P-- Perbunan? | Seals V--? Viton | | |
S | Type the shaft:P--- Metric parallel with key | ?S-- SAE splined | ?? K-- SAE parallel with key | U-- SAE splined,reduced dia. |
C | Mounting flange:C--- SAE 2-hole? | D--- SAE 4-hole | A- ISO 2-hole | ? B- ISO 4-hole |
62 | Port form:11—Back SAE, Port for?SAE flage rear,fixing thread metric | service Lines? 12---Both sides SAE,SAE flage on opposite side,fixing thread UNC | ? 61---? SAE,UNC Screw thread,? SAE flage rear ,fixing thread UNC | 62---Both sides SAE,UNC Screw thread, SAE flage on opposite side,fixing thread UNC |
NOO | Thru-form:N00- Nowhere shaft? | ?without through drive | ? K**--- Thru | with through drive
? |
- - - -
?
?
Read More
Jiangsu Hengyuan Hydraulic Co.,Ltd
Hydraulic Axial Piston Pump,Axial Piston Pumps,Swash Plate Axial Piston Pump
Address: Xin鈥檃n Industry park,
nantong, Jiangsu
China, 226200
Tel: 86-513-83203101
Fax: 86-513-83742220
