Electronics Production Machinery

1. Home
2. Products
3. Electronic & Electrical
4. Electronics Production Machinery

Share us

Dimmable LED Video Lights On Camera Light For Video Lighting LED

LED312AS

Send Inquiry

Description

Dimmable LED Video Lights On Camera Light For Video Lighting LED
?
?
Product?Specifications?
?

- - - -
?Model | ? LED312AS |
?Dimension | ? 19x11.5x3.5cm? |
?Weight | ???350g |
?Voltage | ??DC7.4-14.8V |
?Power | ??18.72 W |
?Color?termperature | ? 3200~5600K (±300K)? |
?Illuminance | ??796Lux/m (3200K)
? 822Lux/m (5600K) |
?Material | ?High quanlity ABS (not normaly plastic) |
?Battery type | ? Rechargeble Lithium battery, 2200mAh, 7.4V |
- - - -

?


?

What& acute;s?Includied


1. 2×2200mAh Lithium battery
2. Battery charger and adapter
3. Car charger
4. Ball head
5. Diffuser
6. carrying bag

?
?
?
Product?Fearures
# Composed of 312 pieces white LEDs with high accuracy, 50,000 hours& acute; lifetime .
# Fashionable design, compact, light weight and portable .
# Could be adjusted from 3,200k to 5,600k; satisfy users& acute; request for color temperature without any color filter.
# Dimming from 10% to 100%, flicker-free.
# Diffusor with magnets, easy to be put on and off.?
# Low working voltage, steady lighting, low heat output and energy saving.
# Stackable to get different lighting effects.?
# Heat-free LED.?
# Super Bright 6,580Lux/50cm Lighting: The 312AS is about 40% brighter than most LED Panels with the same price.
# The 312AS LED video light can work with power adapter directly or with batteries only.


?
?
DIAGRAM
?

?
Operation instructions
?
1. Install the battery onto the light.Turn on the power switch and light works
?
2. There is a power indicator light on the back of the light.Turn off the light and press the power test button to the check the battery level.
?
3. The battery level shows as below:
?
? ??
?
4. Please adjust the brightness and?color temperature of LED312as accordingly.
?
5. There are four built -in magnets in the front of the light,and you can attach a diffuser with magnets to make the light rays much sofer.
6.?When the battery runs out,press the installation and uninstallation button to take off the battery.It takes 4-5hrs to recharge it.
?
?
?Cautions:


1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
?
2. Please do take off the batteries when in storage.
?
3. Please do not block the louvers,or it may seriously influence LEDs& acute; effect and lifetime.
?
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
?
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
?
6. It is not allowed to drop or impact the light to avoid fire.
?
7. It is not allowed to short circuit the battery,or it may seriously damage the battery or cause a
? ? fire.
?
8. It is not allowed to throw the battery into fire.
?
?
?
Warranty: ?
The LED light is guaranteed for 12 months.
The battery is??guaranteed to be charged and?discharged?for 500 times.
?
?
?

Read More