Industrial Supplies Projects
Description
?
Digital Mini Wood Laser Engraving Machine , 100w Laser Etching Equipment
?
?
Introduction:
The machine adopts imported radio frequency laser (metal seal) and imported speedy gavol scanning
?
system. High quality of light beam, long use time, and stable equipment performance exempts
?
maintenance.
?
It is speedy (≤7000mm/s), and precious(less 0.01mm). Marking has non-touched process, permanent
?
marking effect, humanized operation, and stable running. The proprietary control software may
?
compatible?software output of AutoCAD, CorelDraw, Photoshop, etc. It can realized automatic edition and
?
correction of?characters, signs, graphs, images, bar codes, two-dimensional codes, automatically
?
increased serial?numbers. It can support various file formats like PLT, DXF, BMP, JPG, TIF, AI and so on.
?
It may use TIF fonts?directly,and meets the demand of mass on-line and off-line industrialized production
?
in axletree industry.
?
?
Features:
?
1. Configure high power and quality laser tube, can work over 3000 hours.
?
2. DSP control system, rich function, can approach engraving on plane, gradient engraving by 360
?
degrees, cutting and drilling holes etc.
?
3. With function of restoring from poweroff, continuation function from break point.
?
4. Transmit files directly from Corel draw and Auto CAD, Photoshop, Tajima directly.
?
5. Adopt imported linear rail, high precision.
?
6. LCD screen monitor and USB interface support offline working from pen driver.
?
Specification:
?
?
- - - -
X,Y,Z working area | 1300*900mm |
Laser power | 100w with superior quality CO2 sealed glass laser tube |
Cooling mode | Circulating-water-cooling, cw3000 industry chiller |
Power adjusting | 0-100%controlling,no segment and adjusting by software |
Machine control and drive | Speedy DSP controlling with LCD screen panel, steper motor |
motorized up and down working table | 400mm |
Rotary Device | See following pictures? |
Engraving Speed | 1-60000mm/min |
Cutting speed | 1-10000mm/min |
Cutting thickness | 0-20mm plexiglass (others determined by materials.) |
Support Graphic Format | *.plt,*.dst,*.dxf,*.bmp,*.dwg,*.al,*las, Support AutoCAD,CoreDraw, Photo shop, Tajima direct outputting |
Resolution ratio | <0.01mm |
Location precision | <0.01mm |
Gross power | <1000W |
Power supply | AC220V/50Hz; AC110V/60Hz |
Operating temperature | 5°C-40°C |
Operating humidity | 5%-95%(without condensed water)
OR 5%-95% free of condensed water |
- - - -
?
Samples:
?
?
Our service:
?
?
- - - -
After sales service | 1. 18 hour technical support by email and calling. |
2. English manual and CD vedio for machine using and maintaining. |
3. Whole machine Warranty 1.5 Years. |
Quality Control | 1. Strect control machine assembly each link,ensure the machine clean and beautiful. |
2. 48 hours continuous work before the machine leave the factory, ensure high quality of the machine ? |
- - - -
?
Main Features
?
1. economical with cost-effective metal and nonmetal laser cutting machine.
2. Stable machine”s quality(2-year warranty),with comprehensive cutting applications(both able to cut
?
stainless steel, carbon steel, acrylic, etc.metal and nonmetal
3. Lower investment cost, lower operating cost and lower maintain cost.
4. Non-contact height-adjusting configuration enables to cut almost all materials with lowest cost.
5. Working table:open blade with special treated material.never fray and easy operation,suitable for all
?
kinds of hard materials.
6. Steady chassis:stability and precision during high speed work.
7. Moving system adopts Taiwan HIWIN linear guide and precision gear,matched up with advanced PCI
?
controlled 3-phrase stepper motor to ensure the working accuracy.
High efficiency tube with stable laser path,life time around 10000 hours.
Read More
Shandong Man Machinery Equipment Co., Ltd.
Laser Engraving Cutting Machine,Mini Laser Cutting Machine,CO2 Laser Cutting Machine
Address: NO.1 Huangshan Road Liaochen City,
Tianjin, Tianjin
China, 300000
Tel: 86-635-2920668
Fax: 86-635-2120668
