Industrial Batteries
High Pressure Pneumatic Rock Blasting DTH Drilling Rig for 40m Drilling Depth 90 - 165 mm Dia
CL351
Description
High Pressure Pneumatic Rock Blasting DTH Drilling Rig for 40m Drilling Depth 90 - 165 mm Dia
?
CL351 High Pressure Pneumatic Rock blasting Drilling Rig , lower air consumption DTH rock blasting wagon drill
?
Introduction
CL351 crawler pneumatic DTH drilling rig powered by air compressor,the rock drilling machine is equipped with a high power pneumatic motor, the heavy-duty hydraulic drill arm and the main parts are all imported from famous international brands, which guarantee the reliable quality of the air track drill, especially realize much less energy consumption of rolling fraction than that of sliding fraction and make the wear of sliding framework be lower,the CL351 wagon drill have been produced more than 20 years.
Characteristics
1. The chassis is driven by highly-efficient pneumatic motor with powerful traction. Each track is driven independently by air motor with enclosed gear drive, the gradeability arrives 35° with a compressor, or 50° alone.
2. Hydraulic track oscillation is more suitable for positioning drilling machine during drilling.
3. The carriage with rollers provides for minimal wear to the drill guide.
4. Equipped with two hydraulic clamps is easy to load and unload drilling rods and improve efficiency.
5. The special compensation device makes a full production of drill rod threads.
6. The Hydraulic auxiliary functions are easy and efficient for guide extension, boom swing, boom lift, guide tilt and guide dump.
7. Competitive in price,low cost of maintain.
8. Optional dust in wet and dry.
?
- - - -
No. | Specification | Code |
1 | Rock Hardness | F=6-20 |
2 | Hole Diameter | 90-165mm |
3 | Hole Depth | 30m |
4 | Air Pressure | 1.05-2.46Mpa |
5 | Air consumption | 17-21 m3/min |
6 | Max swing of guide | Lift50° Right35° |
7 | Max dump of guide | 180° |
8 | Rotation Speed | 0-72rpm |
9 | Rotation Power | 18.34kw |
10 | Rotation Torque | 2510N.m |
11 | Max horizontaldrilling | 3.38m |
12 | Gradeability | 35° |
13 | propulsive force | 13620N |
14 | pushing power | 3.36kw |
15 | Outside Dimensions(L×W×H) | 5900×2210×1470mm |
16 | Driving power | 8.8×2kw |
17 | Traveling Speed | 3 km/h |
18 | Feed Stroke | 3.66m |
19 | Net weight | 5000kg |
20 | Max swing of boom | Lift 45°?? Right45° |
21 | Max dump of boom | Up 60°???? Down19° |
22 | Drill Hammer | QL40? DHD340 DHD350Q DHD360 |
23 | Dust | Wet/dry(Optional) |
- - - -
?
Picture
Read More
Xuanhua Jinke Drilling Machinery Co., Ltd.
Water Well Drilling Rig,DTH Drilling Rig,Anchor Drilling Rig
Address: Xuanchi Road,Industrial Development Zone,Xuanhua,Hebei,China.,
Beijing, Beijing
China, 100000
Tel: 86-010-84673566
Fax: 86-010-57159802
