Industrial Batteries

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Industrial Batteries

Share us

Heavy Duty Truck Mounted Water Well Drilling Rigs for 600m depth DTH Rotation Drilling 6X4

JKCS600

Send Inquiry

Description

6X4 Heavy Duty Truck Mounted Water Well Drilling Rigs for 600m depth DTH Rotation Drilling ? JKCS600 heavy duty Truck top drive Well Drilling Rigs,600m DTH rotation & Mud drilling borehole drilling equipment ?
Introduction

JKCS600 Multi-functional truck mounted water well drilling rig is a efficient,multi-function full hydraulic water well drilling rig.It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.

JKCS600 truck mounted drilling rig can drilling in all kinds formations by mud drilling in soft formation and air DTH hammer in rock drilling,DTH Hammer is applied in rock drilling, slag is discharged by air pressure and the offstage efficiency is ten times than traditional rotary drilling.

JKCS600 deep water well drilling rigs, in cutting drilling or rotary drilling can be operated in unconsolidated layer, and the slag can be discharged under by mud, the impact drilling operation can also be adopted and slag can be discharged by pressure air, the hydraulic water well drilling rig suitable for drilling complicated geological conditions.

Characteristics

1. The drilling rig can use air DTH Hammer drilling and mud drilling.

2. Centralized control console is suitable for each manipulation and control. Rapid pulling and lifting reduce the auxiliary time and enhance the work efficiency.

3. The truck chassis adopts the 8X4 special crane chassis of brand Sinotruck Howo and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed system are set up on the chassis.

4. It’s a hydraulicrotary drilling rig with directional circulation. It is equipped with BW450/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
5. The power of drilling rig comes from a Cummins engine,132kw Cummins engine drives the large displacement high pressure plunger pump and it is characterized by powerful dynamic and stable performance.

6. The rotary head,have two gear,rotation speed is 0-80 and160rpm stepless adjustment and the rotary torque is 6500-13000Nm.

7. The pulling force can be regulated and controlled, which adapt the machine to deep hole drilling.
8. It can set up a generator which is convenient to welding or illuminate for work at night.

9. Main winch are available on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
10. The main drive of rig is hydrulic and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are also hydraulic operated.

11. Competitive in price, low cost of maintain.
? Keywords:Water well drilling rigs,borehole drilling rig,Water well drilling equipment,Well Drilling Rigs, Portable Well Drilling Equipment, Hydraulic Well Drilling Rigs,portable drilling rig,drill your own water well, home water well ? ? Specification
- - - -
1 | Geology drilled? | 　 | All kinds |
2 | Drilling Type | 　 | DTH & Mud Rotary |
3 | Drill system and operation? | 　 | Hydraulic |
4 | Hole Diameter | mm | Φ140—Φ450 |
5 | Hole Depth | m | 600 |
6 | Rotation Torque | Nm | 6500??? 1st Gear |
13000?? 2nd Ger |
7 | Rotation Speed | rpm | 0-80??? 1st Gear |
0-160?? 2nd Ger |
8 | Drill pipe diameter | mm | 89/114 |
9 | Drill pipe length | mm | 4000/4500 |
10 | Axial pressure | T | 10 |
11 | ?Max. Lifting force | T | 32 |
Winch |
12 | Lifting force of Main winch(Optional) | T | 4 |
13 | Lifting force of hoist | T | 1.5 |
14 | Length of steel wire rope(tool winch) | m | 100 |
15 | Lifting height of tool winch | m | 8 |
Engine |
16 | Diesel Engine type | CUMMINS |
17 | Rated Horse power | ?Kw | 132 |
18 | ?Electrical System | 24 | Volt |
Compressor required |
19 | ?Compressor Type | Rotary Screw/Movable |
20 | Pressure Required | Mpa | 1.05—6.9 |
21 | Air consumption | m3/min | 16—96 |
Truck |
22 | Manufacturer | 　 | SINOTRUCK HOWO |
23 | Model | 　 | ZZ1257M5841W |
24 | Engine | 　 | WD615.62 |
25 | Rated Horse power | kw | 196 |
26 | Discharge Standard | 　 | EU-2 |
27 | Drive type | 　 | 6*4 |
28 | Max.Speed | Km/h | 102.9 |
29 | Steering wheel | 　 | left/right(Optional) |
Mud Pump |
30 | Type | 　 | Hydrulic |
31 | Model | 　 | BW450 |
32 | Stroke | mm | 110 |
33 | Displacement | L/Min | 450 |
34 | Discharge pressure (Mpa) | Mpa | 2-3 |
35 | Suction tube diameter | mm | 89 |
36 | Discharge pipe diameter | mm | 51 |
37 | Liner Diameter | mm | 80 |
Hydraulic Welder |
38 | Mnufacturer | 　 | Dynaset |
39 | Welding current | A | 60-250 |
40 | Hydraulic Min.oilflow | L/min | 42 |
41 | Nom/Max Pressure | Bar | 190/210 |
42 | Voltage | V | 110/220VDC |
43 | Power | Kw | 1or2 |
44 | L*W*H | mm | 390*190*230 |
45 | Foam pump | 　 | Optional |
Generator |
46 | Generator | 　 | Optional |
Dimension |
46 | Net Weight | T | 22 |
47 | ?Shipping Length | mm | 10500 |
48 | Shipping Width? | mm | 2480 |
49 | Shipping Height | mm | 3650 |
50 | ?Working size(L*W*H) | mm | 11000*2480*7147 |
- - - -
Picture

Read More