Safety Products
13.56MHz HF RFID reader writer MR7801 with USB PC/SC or USB (build-in CP2102 USB to UART converter)
MR7801
Description
This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
MR7801 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ISO14443, ISO15693;
various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0
and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 4 SAM card slots in the reader(T=0 and T=1).
The reader supports card-reset of various communication rate; PPSS operation after card-reset.
Interface: USB (build-in CP2102 USB to UART converter) or USB PC/SC
PCD: NXP RC632, RC531, RC400, RC500
MCU: ARM7 or C8051F380 or C8051F340
Four LED lights
Four SAM slots（ISO7816 T=0,1）
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (MIFARE One, typical distance)
Power supply: USB DC5V
Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
Read More
Jinmuyu Electronics CO., LTD.
rfid reader/writer
Address: Room 132, Building 16, Tianqiaowan, Xinhua North Road, Tongzhou District, Beijing, China,
Beijing, Beijing
China, 101101
Tel: 86-10-69559637
Fax: 86-10-80883677
