Lab Supplies

1. Home
2. Products
3. Chemicals
4. Lab Supplies

Share us

Silicone Thermal Conductive Grease 0111 thermal grease for cpu or LED chip

0111

Send Inquiry

Description

● Product Features:

- - - -
Item | Unit | Typical Value |
Item No. | ? | 0111 |
Physical Form | ? | paste |
Color | ? | white |
Main Component | ? | polysiloxane |
Density | g/cm3 | 2.5 |
Penetration Degree | 1/10cm | 330 |
Volatility(200℃,24h) | % | 0.2 |
Volume Resistivity | Ω*cm | 1.0×1015 |
Dielectric Strength | KV/mm | 24 |
Breakdown Voltage | KV/mm | 20 |
Surface Resistance | Ω | 2.5×1014 |
0.1mm Thermal Resistance | m2K/W | 0.00015 |
Work Temperature | ℃ | -50~200 |
Heat Conductivity Coefficient | W/(m·K) | 1.2 |
- - - -

? Single component, white color.

? Physical form: paste

? Made of metallic oxide and polysiloxane

? Wide operating temperature range

? Nontoxic, non-corrosive

? Eco-friendly, odorless

? Doesn’t go dry and flowing at high temperature.

? High performance on insulation, damp proofing, corona resistance, electric leakage resistance and chemical resistance.

? Can be dispensed both by hand or machine.

? Heat conductivity coefficient: 1.2 W/(m·K)

● Main Applications:

? Widely used for the thermal conductivity of electronic components including the filling of gap between CPU and heat sink.

? For the filling of gap between high-power audion, thyrister and basic materials such as copper and aluminum to reduce the temperature of electronic components.

● How to Use

? Stir this product before using if it’s long time unused.

? Clean the object surfaces to get rid of oil and dirty before use.

? The object surfaces should be even and uniform.

? To dispense smoothly, please stir for 2 minutes before use.

? Apply a little for try before massive use.

? Only a thin layer of this product needed for use to avoid wastes.

? Do not keep this product exposed in the air for a long time.

?

● Packing:

? 2kg/bucket, 6bukets/carton

● Storage:

? Store it in dry and shady places at the temperature of 8~28℃

? Storage life is 12 months from the date of manufacture.

● Caution:

? Keep it away from children.

? In case of contact with skins, wipe and then flush with clear water.

? In case of contact with eyes, flush with clear water immediately and go to hospital for checking.

? For the use of this product, it’s not the more the better but the thinner the better under the condition of full filling of gaps is assured.

Read More