Non-metallic Mineral Products

1. Home
2. Products
3. Minerals & Metallurgy
4. Non-metallic Mineral Products

Share us

YH-2 TDS Organoclay For Paint

No.1-1

Send Inquiry

Description

YH-2 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to High polarity.1. Advantages:?☆ High gelling efficiency over low to high ?polarity organic liquids.☆ Easy of incorporation. No need for polar activator or making pregel.☆ Consistent in rheology and thixotropy development.☆ Easy of dispersion with excellent fineness.☆ Good anti-sagging property and anti-sediment property.☆ Can be added at any step,Website:http://www.organophilic-clay.com,even can be used in post-addition to correct the final viscosity of a certain batch.2. Typical Properties:?ColorAppearanceDensityMoisture
? ? ?(@105℃,2hrs)Fineness through 200 meshLoss on Ignition
? ? ?( @1000℃ )WhiteFree Flowing Powder1.6g/cm3≤3.5%≥99%≤38%3. Typical Applications:●Acrylic?paint●Silica?paint●Alkyd?paint●Inks(mineral?oil)●Anti-corrosion?paint●Inks(Nitro)●Chlorinated?rubber?paint●Adhesive●Nitro?lacquer●Varnish●Primer?paint●Lubricating?grease●Polyester?paint?4. Incorporations:YH-2 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, YH-2 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.YH-2 can be added at any point in the manufacturing process. If addition is made with polar activator or after grinding,better performance can be expected.5. Recommended Levels:The amount of YH-2 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-1.5% based on the total formulation weight. For high thixotropy systems or thick film paints, the recommended levels are between 1%-2.7%.6. International Countertype:?Bentone ?SD2, ?Bengel ?828?

Read More