Non-metallic Mineral Products

1. Home
2. Products
3. Minerals & Metallurgy
4. Non-metallic Mineral Products

Share us

YH-908H TDS Organic Bentonite

No.1-1

Send Inquiry

Description

YH-908H is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,Website:http://www.organophilic-clay.com,medium and high polarity.1. Advantages:☆High gelling efficiency over low, medium and high polarity organic liquids, especially in 200#solovent oil, coal tar, aromatic compounds.☆Produce reproducible thixotropic consistency over a wide temperature range.☆High viscosity and excellent thickening property over a wide temperature range.☆Imparts particle suspension, preventing hard settling of pigment and fillers.☆Exerts strong film reinforce action in organic binder systems.2. Typical Properties:ColorAppearanceDensityMoisture(@105℃,2hrs)Finenessthrough 200meshLoss onIgnition( @1000℃ )LightWhiteFreeFlowingPowder1.7g/cm3≤3.5%≥98%≤35%3. Typical Applications:4. Incorporations:YH-908H belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate)is 30%-50% by weight of YH-908HIt is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result in poorer viscosity development.5. Recommended Levels:The amount of YH-908H rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the totalformulation weight.6. International Countertypes: Bentone?52,Tixogel? VP,Claytone?HT.NOTE: The information herein is currently believed to be accurate. We do not guarantee its accuracy. Purchasers shall not rely on statements herein when purchasing any products. Purchasers should make their own investigations to determine if such products are suitable for a particular use. Th

Read More