Electrical Product Agents

1. Home
2. Products
3. Electronic & Electrical
4. Electrical Product Agents

Share us

Digital Adjustable Soldering Iron Station Eddy Current Heating High Precision

RT-S0150

Send Inquiry

Description

?

High Frequency Eddy Current Heating Method High Frequency Soldering Station

?
?
Working Principle?YMK High Frequency Soldering Station:


Adopt high frequency eddy current heating (induction heating principle), High frequency Lead free soldering station is heat up at soldering tip itself, and no heat conduction, reduce thermal losses, heat up fast and temperature returning quickly.

?

?

YMK High Frequency Soldering Station Character :


Not only suit for lead-free soldering, also suit for big solder joints soldering,fast & continuously?soldering required low temperature soldering. no idle the high temperature,
When the moment to interaction the temperature will be go down, the superpower heating power can make the heat energy spurt out at once, and make the perfect solder, no cold soldering to cause the unstable?connection problem.

?

?



?

?

Soldering Station Arguments:

?

- - - -
Power | 150W |
Output voltage | AC36V,380KHZ |
Temperature range | 50~600 °C (depending on the mode setting) |
Maximum ambient temperature | 42 °C |
Temperature stability | ±2 °C (in still air, no load) |
Housing Material | Aluminum Alloy |
Size | 110*105*175mm |
Net weight | 2.6KG |
- - - -

?

?

Set Temperature in YMK Soldering Station:

?

Way 1: press & quot; +& quot; & & quot;-& quot; button to adjust the temperature you want, and then press ＊ button for confirmation.

?

Way 2: press ＊ button in first and then press & quot; +& quot; & & quot;-& quot; button in same time, Hundred Digit is flash, press & quot; +& quot; or & quot;-& quot; button to find the exactly data, then press ＊ button to move to Ten Digit, Tem Digit is flash too, again press & quot; +& quot; or & quot;-& quot; button to find the exactly data; press ＊ button to move to Single Digit, Single Digit flash as well, press & quot; +& quot; or & quot;-& quot; button to find the exactly data, finally, press ＊ button one more time for the final confirm.

?

?

Temperature Calibrating Between Soldering Station And Tip:

?

After you re-set a temperature and use the Temperature Tester to check the tip if the temperature match with soldering station temperature or not, if the temperature is not match, then you need to calibrate the tip temperature, the step as below:

Example: re-set temperature is 380°C and tip temperature is 350 °C.

Enter the tip temperature 350 °C into soldering station and wait for soldering station self-correction, after several seconds, the soldering station is back to 380°C, and then use the Temperature Tester to test the temperature at tip, it should be show 380°C as well, +/- 5 °C is allowed.

* Recommend using the 191/192 temperature tester.

?

?

Picture:

?

?



?

?

Read More