Industrial Supplies Projects

1. Home
2. Products
3. Machinery & Industrial Supplies
4. Industrial Supplies Projects

Share us

Power saving Plastic Injection Molding Machine for Chair table model M1100

M1100

Send Inquiry

Description

Power saving injection molding machine for Chair table



?

Detailed Product Description

?

MZ - D series servo energy - saving plastic??Injection molding machine ,?More fast cycle:valve panel design in bigger hole with bigger oil pipe.Oil go though the valve more fast flow and the Machine action more goes more faster in mould open and ejector process.Adopt?double?injection?cylinder?,more?faster?and?powerful.avoid?any?injection?less?or?injection?not?in?the?center?by?single?injection?cylinder

?

COMPONENT

?

- - - -
COMPONENT | BRAND&ORIGINAL | ? |
hydraulic?system | Servo |
hydraulic?motor | INTERMOT-ITALY-CHINA | ● |
servo?motor?control?system | HUICHUAN/PHASE-CHINA | ● |
hydraulic?pump | fixed?Pump | VICKERS?OR?YUKEN | / |
gear?pump | SUMITOMO-JAPAN | ● |
hydraulic?direction?valve | NORTHMAN-TAIWAN | ● |

propotional?flow?control?valve&propotiona l?pressure?control?valve | HNC-TAIWAN?FOR?BIG?MACHINE, SMALL?MACHINE?USE?DONGFENG-CHINA | / |

mould?adjust?hydraulic?motor | INTERMOT-CHINA? | ● |
hydraulic?safety?valve | NORTHMAN-TAIWAN | ?● |
electric?system | ? |
computer/controller | TECHMATION-TAIWAN | ● |
relay | SCHNEIDER-GERMANY | ● |
main?switch | LS-KOREA | ● |
linear?transducer | GEFRAN-ITALY | ● |
limited?switch | PANASONIC-JAPAN | ● |
breaker | CHENTAI-CHINA | ?● |
electric?motor | ZHONGDA-CHINA | / |
others | ? |
?High?pressure?hydraulic?pipe | GOODYEAR-USA | ● |
seals | VALQUA-JAPAN | ● |
pressure?meter | Tecsis-USA | ● |
automatic?lubrication? | SL-CHINA | ● |
screw? | JINGXING-CHINA?38CrMoAlA | ● |
- - - -

?

SPECIFICATION?

?

- - - -
?SPECIFICATION? | M1100 |
ITEM | A | B | C | ? |
??INJECTION??UNIT | ? |
?????????SCREW??DIAMETER | mm | 110 | 120 | 130 | ? |
??????SCREW??L/D??RATIO | L/D | 22 | 20.2 | 18.6 | ? |
???SHOT??VOLUME(THEORETICAL) | ? | 4606 | 5482 | 6434 | ? |
??????????INJECTION??WEIGHT(PS) | g | 4192 | 4989 | 5855 | ? |
??????????INJECTION??PRESSURE | Mpa | 995.2 | 1184 | 1390 | ? |
??????????INJECTION??RATE | g/sec | 174 | 146.3 | 124.7 | ? |
?????????SCREW??SPEED | rpm | 110 |
CLAMPING?UNIT | ? |
?????????????CLAMP??TONNAGE | KN | 10800 |
??????????TOGGLE??STROKE | mm | 1100 |
??????????MIN.MOLD??HEIGHT | mm | 460 |
??????????MAX.MOLD??HEIGHT | mm | 1120 |
??????SPACE??BETWEEN??TIE??BARS | mm | 1150X1100 |
?????????????EJECTOR??TONNAGE | KN | 245 |
??????????EJECTOR??STROKE | mm | 350 |
?????EJECTOR??NUMBER | PC | ? |
OTHERS | ? |
??MAX.PUMP??PRESSURE? | Mpa | 16 |
?????????HEATER??POWER | KW | 68 |
???PUMP?MOTOR??POWER | KW | 37+55 |
?????????OIL??TANK?CUBAGE | L | 1780 |
?????????MACHINE??DIMENSION(LxWxH) | M | 11.7X2.6X3 |
??????????MACHINE??WEIGHT | T | 56 |
- - - -

?

Machines feature?

?

1.?Adopt?38CrmoAla?Material?for?key?in?toogle?part.more?endurable?in?using.other?supplier?may?use?40CR?or?45#?Steel

2.?Double?oil?tank?design:because?short?the?distance?for?the?oil?return?line?,the?hydraulic?system?response?is?getting?more?quicker.?In?the?meantime,this?design?will?reduce?the?oil?temperaure?,protect?the?oil?seal.

3.?Using?bridge?design?for?the?injection?unit,avoid?material?leakage?if?the?injection?unit?is?not?stay?in?the?same?level.

4.?Adopt?double?injection?cylinder?,more?faster?and?powerful.avoid?any?injection?less?or?injection?not?in?the?center?by?single?injection?cylinder

5. Screw?barrel?material?using?top?3?supplier?in?China

6. Offer?2?hydraulic?core?pull?in?the?valve?panel?for?future?installation?

7. Products?collection?hopper?can?be?dis-assembled?and?install?convenyor?in?future

8.?Install?the?linear?transducer?for?clamping?near?the?crossing,not?easy?to?get?damaged?by?clearning?or?maintaiance.

9. Mould?thickness?fully-automatic?adjustment?by?sensor,wheel?and?moto,more?accurate

10. Install?screw?rotation?speed?sensor?,can?see?the?real?material?charging?status?in?the?controller.

11.?Hydraulic?safty?protection?installed?in?both?front?and?rear?operation?door.when?any?door?is?open,the?hydraulic?system?will?be?shut?down?to?provide?more?safty?protect?for?the?operators.?

?

Platen size:

Read More