Industrial Supplies Agents
Description
PET Preform plastic injection molding equipment 3.4T High plasticization
?
1. feature
According to the material property of PET and the molding requirements of it,our experienced engineering team design the machine special for the application.The design satisfies all our customers in PET molding production.
# # Big diameter screw design and Bigger L/D ratio
# High plasticization capacity
# Entended machine framework,enlarged space between tie-bars,mold opening stroke,mould thickness and ejection stroke
# Specialized screw set for PET+FB or slice PET are on request as option
# Four or above stages precise temperature PID control for barrel
# Spring nozzle for the machine below 650ton,hydraulic nozzle for 650ton,meeting customer’s special requirements by effectively avoid overflow
# Dehumidifying dryer selected for PET resin’s special demands of removing moisture
# Suitable for both variable pump and servo system
?
2. Specifiation:
- - - -
? | HM-110 |
INJECTION?UNIT? | UNIT? | A | B | C |
SCREW?DIAMETER? | mm | 34 | 36 | 40 |
?SCREW?L/D?RETIO? | L/D | 23.1 | 21.8 | 19.6 |
? ?INJECTION?VOLUME | cm3 | 167 | 188 | 232 |
?INJECTION?WEIHGT? | g | 153 | 171 | 211 |
oz | 5.39 | 6.04 | 7.46 |
INJECTION?RATE? | cm3/?s | 84.3 | 94.5 | 116.7 |
?INJECTION?PRESSURE | Mpa | 206 | 183 | 149 |
CREW?SPEED | rpm | 210 |
?CLAMPING?UNIT? | ? | ? |
?CLAMPING?FORCE? | kN | 1100 |
MOLD?OPEN?STROKE? | mm | 330 |
?SPACE?BETWEEN?TIE?BARS? | mm | 375×375 |
MAX.MOLD?HEIGHT? | mm | 150～380 |
??EJECTOR?STROKE? | mm | 100 |
?EJECTOR?FORCE? | kN | 38 |
OTHERS? | ? | ? |
?MAX.PUMP?PRESSURE? | Mpa | 16 |
?PUMP?MOTOR?POWER | kW | 13 |
HEATER?POWER | kW | 7.5 |
MACHINE?DIMENSIONS | mm | 4.3×1.2×1.75 |
OIL?TANK?CAPACITY | L | 170 |
MACHINE?WEIGHT | t | 3.1 |
- - - -
?
3.Configuration:
?
?
- - - -
COMPONENT | BRAND&ORIGINAL |
Fixed pump? | Servo |
hydraulic system |
HYDRAULIC MOTOR | INTERMOT-ITALY-CHINA | INTERMOT-ITALY-CHINA |
SERVO MOTOR CONTROLLER | / | TONGLING-CHINA |
HYD& acute; PUMP | FIXED | VICKERS-USA OR YUKEN-JAPAN | VICKERS-USA OR YUKEN-JAPAN |
GEAR PUMP | / | SUMITOMO-JAPAN |
DIRECTION VALVE | VICKERS-USA OR YUKEN-JAPAN | VICKERS-USA OR YUKEN-JAPAN |
PP VALVE | HNC-TAIWAN | / |
MOULD ADJUST MOTOR | INTERMOT-ITALY-CHINA | INTERMOT-ITALY-CHINA |
electric system |
CONTROLLER | TECHMATION-TAIWAN | TECHMATION-TAIWAN |
RELAY | SCHNEIDER-GERMANY | SCHNEIDER-GERMANY |
LINEAR TRANSDUCER | MIRAN-CHINA | MIRAN-CHINA |
LIMITED SWITCH | SCHNEIDER-GERMANY | SCHNEIDER-GERMANY |
BREAKER | SCHNEIDER-GERMANY? | LS-KOREA |
ELEC& acute;MOTOR | HUANQIU-CHINA | / |
others |
HIGH PRESSURE PIPE | GOODYEAR-USA | GOODYEAR-USA |
SEAL | Helate-England | Helate-England |
AUTO LUBRICATION | SL-CHINA | SL-CHINA |
SCREW AND BARREL | 38CrMoAlA-China | 38CrMoAlA-China |
- - - -
?
4.Platen drawing
Read More
VAINO INTERNATIONAL LIMITED
HDPE Blow Molding Machine,Extrusion Blow Molding Machine,Automatic Blow Molding Machine
Address: Room1315,B# Ningbo Chamber Of Commerce Building,No.588 Tiantong South Road,Yinzhou District,Ningbo,China,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-88054805
Fax: 86-574-88054565
