Electronic Signs

1. Home
2. Products
3. Electronic & Electrical
4. Electronic Signs

Share us

900lm pure white Explosion Proof LED Lighting / T8 led glass tube 9w

900lm pure white

Send Inquiry

Description

800lm pure white ?Explosion Proof LED Lighting / T8 led glass tube 9w
?
Features:
1.Perfect?light?quality?design,?system?efficacy?>?100lm/W?,?can?replace?traditional?fluorescent?tube?light.
2.Very?even?light?output,?no-glare?design.
3.Universal power?input?range?of 85~265?VAC.
4.Very?nice?design,?high?quality glass??material?body.
5.Environmental?friendly.?RoHs?Compliant?
6.The?color?temperature?follows?ANSI?C78.337?Standard.
?
Description:
Using hi-tech light diffuser, no glare
Longer Life than fluorescents, 5 years.
Good light quality and good heat dissipation
Instant start, no flickering, no humming
Special circuit design, each LED work separately,
Avoiding the single broker LED influence problem
No fluorescent flickering
Explosive-proof No hazard of mercury or lead entering the environment
Application:
The?commercial?application?place?where?need?high?lux?level?but?soft?can?clear?light?quality,?
such?as?big?shopping?mall,?hospital,?office,?factory,?school,?airport,?etc.?
Specifications:?
- - - -
Item?No. | RE-G-T8-0.6M | RE-G-T8-0.9M | RE-G-T8-1.2M | RE-G-T8-1.5M |
LED?Tube | T8?tube | T8?tube | T8?tube | T8?tube |
LED?Chip | SMD2835 | SMD2835 | SMD2835 | SMD2835 |
Power | 9W | 12W | 18W | 22W |
Length | 600mm | 900mm | 1200mm | 1500mm |
Light?output | >900lm | >1200lm | >1800lm | >2200lm |
Body?Material | ?? Glass | Glass | Glass | Glass |
CRI | ≥80 | ≥80 | ≥80 | ≥80 |
Color?Temp. | 3000K/4000K
/5000K | 3000K/4000K
/5000K | 3000K/4000K
/5000K | 3000K/4000K
/5000K |
Power?Supply | AC?85-265V | AC?85-265V | AC?85-265V | AC?85-265V |
? Working
?Frequency | 50/60Hz | 50/60Hz | 50/60Hz | 50/60Hz |
Power?Factor | >0.95 | >0.95 | >0.95 | >0.95 |
Beam?Angle | >300° | >300° | >300° | >300° |
Working?Temp. | -10~50℃ | -10~50℃ | -10~50℃ | -10~50℃ |
Working?Lifetime | >25,000?hours | >25,000?hours | >25,000?hours | >25,000?hours |
Certificate | CE,RoHS,ETL | CE,RoHS,ETL | CE,RoHS,ETL | CE,RoHS,ETL? |
- - - -

?
Light Source Test Report

Dimmension(unit:mm)

nstallation instructions


Attention
Led tube could be installed directly to replace traditional tube for the traditional T8,T10 fixtures (Just take off the Starter is ok).
?
# Led tube must work with the correct voltage as the specification(rated voltage)
# Do not open the led tube by yourself.
# We recommend you remove the inductive ballast, for indoor use.
# Such led tube cannot replace emergency light
# We recommend that the suitable working temperature should be -20?C ~ + 40?C for our led tube, if exceed this range, will bring bad situation for product lifetime.
# The product installation & maintenance should be operated by professional workers
Remark:This product performance is being improved unceasingly, like has the change, not separate informs even slightly.
#
Competitive Advantage:
? ? ? ?1 high power LED source with low attenuation,
? ? ? ?2 Low power consumption, highly efficiency, highly antistatic,
? ? ? ?3 saving energy and protection environment,
? ? ? ?4 long lifespan(>50.000hrs)
? ? ? ?5 No fluorescent flickering
? ? ? ?6 No RF interference, no buzzing noise.
? ? ? ?7?Easy in stallation
? ? ? ?8 No dangerous of glass broken
? ? ? ?9 Heat resistance up to 380℃
? ? ? 10 No coating falling off, color change, anti back flow;
? ? ? 11 Explosive-proof
? ? ? 12 Blue-ray resistance without human hazard and provide eye protection
? ? ? 13 CE/ETL & ROHS approval


?

Read More